Keil mikroc trabalhos

Descrição do JOB: 0. O Candidato irá trabalhar com Programação Embarcada usando Linguagem C em Microcontroladores; 1. Acréscimo de Interface IHM de Equipamento para Display Alfanumérico; 2. Alteração de Interface de Controle de Touch para Botões; 3. Atuação com Mentoria e Orientação; 4. Atuação com Autonomia abrangente e horário livre; 5. Contratação como Autôn...Combinar pelo JOB completo; Características do Profissional: 1. Pró-ativo; 2. Aprendizado por conta própria; 3. Orientação à resolução de problemas; 4. Experiência com Elaboração e Alteração de Firmwares ...

Criar um código C no mikroC de um sistema simples de trânsito, 1 cruzamento com multa de velocidade, sincronização de sinais, e armazenamento de dados em um sd card.... o proteus (simulador) já esta pronto

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

...connection to public domain - With Wiznet W5500 and STM32 microcontroller. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds and protocols. - STM32 and W5500 modules at hand Your job will be to write an optimal code, preferably in STM32CUBEIDE or Keil MDK Arm. The Wiznet W5500 is connected to STM32 via SPI, it should connect to ethernet router with DHCP mode and afterwards establish and maintain a websocket connection to public domain, sending and receiving data. The code should be clear, well commented and easily readable-reusable. The devices used are STM32F103C8 and Wiznet W5500. Please, make your bid indicating your understa...

I'm in need of an expert in embedded C programming, particularly with a strong knowledge of Keil MDK 6. I want you to work on a project for an STM32F411, which needs to have the following functionalities: - Virtual COM via USB - Embedded C programming - Keil MDK 6 integration In addition to these core requirements, the project must also meet performance constraints - this must be carefully considered throughout the development process. I'm looking for a freelancer that is able to develop the code from scratch. It's important that you have a solid understanding of embedded systems, as well as experience with USB communication protocols. Your familiarity with Keil MDK 6 is also crucial as it will be the primary IDE used for this project. A background in...

I'...project, but any prior experience in File transfer, Network communication, and Remote device management would be an added bonus. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds. Your job will be to write an optimal code, preferably in STM32CUBEIDE or Keil MDK Arm. The Wiznet W5500 is connected to STM32 via SPI, it should connect to ethernet router with DHCP mode and afterwards establish and maintain a websocket connection to public domain, sending and receiving data. The devices used are STM32F103C8 and Wiznet W5500. Please, make your bid indicating your understanding of the project, and your proposed timeline for complet...

I'm seeking an experienced embedded software programmer for a Keil 8051 microcontroller. The key functionalities required include: - Control of GPIO (General Purpose Input/Output) - Timer/Counter functionality Preferably, the freelancer should have prior experience with microcontrollers and a deep understanding of Keil 8051. You will be tasked with the development, testing, and debugging of the embedded software codes to ensure efficient and reliable interaction among the said functionalities of this microcontroller. Any experience with real-time operating systems is a plus.

...will involve utilizing the Keil compiler with STM Low Level Drivers (LL) to develop firmware for the IR transmitter. Please note that the project should not use the HAL driver. Responsibilities: - Implement the Phillips RECS80 protocol on the STM32F072 microcontroller. - Develop firmware using the Keil compiler and STM Low Level Drivers (LL). - Utilize the IRTIM peripheral on the STM device, with TIM17 for the carrier frequency and TIM16 for data transmission. - Interface the IR LED through an MMBF170 N-Channel FET on the GPIOB9 pin. Requirements: - Proficiency in embedded C programming. - Experience with STM32 microcontrollers, particularly the STM32F0 series. - Familiarity with the Phillips RECS80 protocol and the SAA3008 datasheet. - Expertise in using Keil com...

Project for mspm0g3507 board platform; Keil uvision cmsis based Bare Metal Approach

I am in need of an proficient Embedded C programmer who is familiar with the STM32 Discovery Board and Keil Microvision 4. Your task will include coding for multiple touch functionalities including: - Multitouch gestures - Single touch commands - Touchscreen keyboard implementation Furthermore, the touch functions should enable: - Scrolling and zooming - Swipe Gestures Knowledge of microcontroller registers is a must. This project requires complex yet precise command execution. Those who have firsthand experience working on similar projects will be given priority. Please share relevant work samples in your bid.

I created a proteus circuit and it does work using PIC16F887 with the code inside using the MikroC compiler. But now I want to use MPLAB IDE instead so help me convert Code From MikroC to MPLAB IDE

Led1 to turn on Bulb 1 with response Led2 to turn on Blub 2 with response Need complete keil project file

I am seeking expertise in creating a project that inv...card using a standard SPI module. The code should operate without using FreeRTOS system. Moreover, the developed code will need to be compatible with Keil 5, and all project files should be shared in addition to the project folder. Tasks to be Accomplished: Implement a module for writing and reading text data in CSV format on a MicroSD card. Ensure seamless integration with a hardware SPI controller. Deliver complete project folder to work with Keil 5. A hands-on experience with MicroSD operations, solid understanding of CSV file manipulation and a strong knowledge of SPI hardware controller is expected for this task. Familiarity with Keil software would be a plus. The final code must operate independently ...

We're looking for a seasoned/experienced embedded engineer to fulfill the following tasks: - Code analysis of source code that operates an industrial coin sorter - Detailed documentation of the codebase to provide clear understanding and instructions for future development - Refactoring of the codebase to improve its structure and efficiency Source code is written in C (IDE: Keil C51). We will provide as much information as we have on hardware and PCB specification. Caveat: These are currently NOT well documented. Requirements: * Programming Languages - C * Expertise / familiarity with 8051 MCU, specifically Nuvoton Chipset. Ideal Skills and Experience: - Strong knowledge and experience in embedded C programming and the 8051 microcontroller - Expertise in code analysis and...

it is a seven-segment display driver with serial interface. datasheet can be found at: the attached datasheets are for the same part just different part number. if anyone has experience working with the IC do contact me. i want to program for 8051 core in C (keil C). can provide the trial hardware for the same. Regards Rajan Dhrangadharia

I am seeking a skilled individual with access to ChatGPT Turbo (128k) to perform AI-based code analysis and refactoring on 15 C files. The goal is to identify and address issues,...uses an 8051. Scope: While I estimate this to be a roughly 2-hour project, the actual time may vary based on code complexity. Please bid accordingly. Deliverable Submission: I can provide you with a shared Dropbox folder, or access to a private repository on Github, whichever you think is most appropriate. Experience and Preferences: Experience with the Keil C51 compiler is not required, but detailing the depth of your experience with Keil C51 will push you to the top of the list as we are currently considering some code enhancements. I look forward to reviewing your proposal. Best regards,...

...adaptation. Please read carefully below explanation and give your price. Dont waste our time if you dont have stm32 project experiences. 1- STM32 bluepill or blackpill will be used. 2- 8CH STM32's ADC Reading and sending via COM port to the computer and see values on our software. 3- ADC reading and data sending speed 50k samples for each channel. Total 400k sampling in a second. 4- All STM32 cube and Keil codes will be given and all codes have to have explanations. 5- We have a C# based Windows software. Now, our software can not get data over 5000 samples. Our software will be UPDATED. I will share our software's C# Sln file and explanation of the software. You can create new software or update ours. BUT WHEN THE JOB FINISH OUR SOFTWARE SHOULD BE WORK. 6- The proje...

I am looking for a freelancer who is familiar with the STM32 F303RE microcontroller and bare metal programming, as I am in need of guidance for my project. Project Requirements: - Develop a program using Keil uVision in thumb2 mode - The program should read and display register values of the STM32 F303RE microcontroller - The displayed register values should be in hexadecimal format Ideal Skills and Experience: - Proficiency in bare metal programming for the STM32 F303RE microcontroller - Experience with Keil uVision and thumb2 mode - Strong understanding of register operations and display formatting in hexadecimal Please provide examples of previous projects or relevant experience in your proposal.

I am looking for a freelancer who is experienced in Assembly programming language to work on software "Keil uversion4 MDK software,Arm processor

We have a data logging software on windows C#, STM32 and our software adaptation Please read carefully below explanation and give your price. 1- STM32 bluepill or blackpill will be used. 2- 8CH STM32's ADC Reading and sending via COM port to the computer. 3- ADC reading and data sending speed 50k samples for each channel. Total 400k sampling in a second. 4- All STM32 cube and Keil codes will be given and all codes have to have explanations. 5- We have a C# based Windows software. Now, our software can not get data over 5000 samples. Our software will be UPDATED. I will share our software's C# Sln file and explanation of the software. You can create new software or update ours. BUT WHEN THE JOB FINISH OUR SOFTWARE SHOULD BE WORK. 6- The project can not be separated. Just...

We have a Nrf52 project developed by eclipse, now we want to convert the project working under Keil IDE.

Project requirements: 1. Creation fingerprint templates from source graphic images according to the ISO format ISO/IEC 19794-4:2011. Demo application works on x86 platform. 2. Fingerprint verification software (1:1) for ARM Cortex-M3 platform The source code of the developed algorithms must be executed on microcontrollers with the ARM Cortex-M3 architecture. Can be used Keil Simulator for developing. Experience in devepment of fingerprint recognition is required.

Hello, With STM32f103 has micro USB, we refer this usb below. Stmcubemx and keil preffered. Needs: 1- We want to program stm with USB without change boot jumper. 2- we want to read analog channel and get values from USB (as COM Port). 3- we need analog sampling speed 50000 per second and per channel (8ch) 4- we need to get analog values as float array and array values seperated by (;) 5- we need array header value. 3xhex values will send as header of before array analog values. 6- we need code, and detailed pdf document for all settings. Codes should have information.

Nordic nRF52 PDM Microphone Project I am seeking a software developer who can assist me in developing a Nordic nRF52 PDM microphone. The microphone should measure sound level in dB. Ideal Skills and Experience: - Proficiency in software development for Nordic nRF52 in KEIL with SDK by Nordic It is necessary to implement the code for the microcontroller in C . It is necessary to receive data from the MEMS microphone MMICT390200012 via the PDM interface. Microcontroller Nordic nRF52832. ARM KEIL development environment. The environment is already configured and there is a project. The official SDK from Nordic nRF5_SDK_17.1.0_ddde560 is used. All peripherals, UART for debugging are also configured. PCBA is factory produciton. Scheme in the attachment Algorithm: Set up the PD...

I am looking for a Hyderabad based PCB L...manufacturing teams  Assist teams in preparing test procedures to verify PCB functions  Assist in component sourcing and use of the best components for the design. Function specific experience  Experience with AMS Design – Amplifiers, Xtals, Interfaces, Regulators etc.  PCB Layout of multi-layer boards – rigid, flex etc.  Board Bring-up & Testing  Tools – GIT, Kicad, Matlab, Freecad, LTSpice, Keil etc.  MCU Platforms – TI, STM, NXP, SiLabs, Nordic, Arduino, R-Pi etc.  Wireless Platforms – LoRa, Sub 1G, BLE/BLE5, BT, WiFi, LTE/LTE-M, 5G/4G/3G, GPRS/EDGE etc. If you are a PCB Layout Engineer with KiCad experience and are available to work on-site in Hyderabad, please apply with your relevant experie...

We are disrupting the 2W/3W & off-road 4W mobility markets with Ridot-K, our Connected & Smart Android HMI: Infotainment, Instrument cluster, Full screen maps, ADAS and more. With Ather Energy, Ola Elec...manufacturing teams  Assist teams in preparing test procedures to verify PCB functions  Assist in component sourcing and use of the best components for the design. Function specific experience  Experience with AMS Design – Amplifiers, Xtals, Interfaces, Regulators etc.  PCB Layout of multi-layer boards – rigid, flex etc.  Board Bring-up & Testing  Tools – GIT, Kicad, Matlab, Freecad, LTSpice, Keil etc.  MCU Platforms – TI, STM, NXP, SiLabs, Nordic, Arduino, R-Pi etc.  Wireless Platforms – LoRa, Sub 1G, BLE/BLE5, BT, WiFi, LTE/LTE-M...

Write code in "MikroC Pro for Pic" for making frequency meter with pic16f628a and test it on proteus with LCD. Frequency range: 0 - 20 MHz; Measurement accuracy: 300-500 Hz; Compiler: mikroC Pro for Pic;

Proje sadece 1 saatlik bir proje piyasa ortalamasi ne kadar bilmiyorum ama 1 saatlik çalışmaya göre ücret ödemesi yapicam pazarlığa açığım . Online test ve klasik karisik keil kodlama sisteminde mikroişlemci finali yarın (9 Haziran ) saat 14:00 da başlayacak

Nordic nRF52 PDM Microphone Project I am seeking a software developer who can assist me in developing a Nordic nRF52 PDM microphone. The microphone should measure sound level in dB. Ideal Skills and Experience: - Proficiency in software development for Nordic nRF52 in KEIL with SDK by Nordic It is necessary to implement the code for the microcontroller in C . It is necessary to receive data from the MEMS microphone MMICT390200012 via the PDM interface. Microcontroller Nordic nRF52832. ARM KEIL development environment. The environment is already configured and there is a project. The official SDK from Nordic nRF5_SDK_17.1.0_ddde560 is used. All peripherals, UART for debugging are also configured. PCBA is factory produciton. Scheme in the attachment Algorithm: Set up the PD...

The purpose of a game called GUESS is for the contestant to guess a number which has been pre-loaded into a machine. The contestant will enter his/her guess of the number and the machine will display 0x0F, if the entered number is below the ‘unknown’ number. If the entered number is above the ‘unknown’ number, 0xF0 is output and if the entered number is equal, 0xFF is output and the game ends. Write an Arm Assembly language program called GUESS to implement the above task. Assume that the number to be pre-loaded is between 0 and 255 and is stored in a byte variable called ‘unknown’.

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

Keil Business Solutions GmbH is an innovative Google Reseller and IT Service Provider. For a client project we are looking for a Senior SAP FI-AA Consultant with S4/HANA experience (f/m/d) – remote & on site Spain Project plan: 1.5.23 – 16.6. 23 blueprint phase à budget approx. 8 days (2x2 day workshop at Granollers + 2-3 days writing blueprint) 1.7.23 - approx. 30.4.24 Project phase à Golive Spain approx. 1.3.24 / 1.4.24 à Budget results from the blueprint requirements but is estimated between 20 - 30 days (60% on site / 40% remote) from approx. 1.5.24 Subsequent on-site support for S/4 HANA approx. 1-2 days per month Skills: • Experience as a SAP FI-AA Consultant • Experience with S4/HANA • knowledge of the SAP FI local re...

Write code in C, will compile with Keil. 1. Device boots into sleep mode. 2. RFID Reader is connected to SPI port. (CR95HF) 3. Card # is 4 bytes. 4. When card is scanned, you will receive card #. If no card # stored, this become default card #. Devices wakes up here. () 5. If card # is stored and matched, then open. blink LED green and sends pwm output else blink red. If match it will reset to no pin. 6. Read date & Time from RTC and store in transaction table along correct card # We using rgb led so they are basic port pin. Need to make high, wait 300 ms then low. Microcontroller : MS51EC0AE I2C used: 24LC512, 24C04 RFID Reader Used: CR95HF For MS51EC0AE rewrite the code: P1.0-spi clk, P0.0 – spi mosi, P0.1 – spi miso, P0.3 – interrupt for card scan, P0....

Hi, i am using stm32f407 discovery kit and i connected w5500 ethernet module but the issue is it reply me with sip : and MAC: FF:FF:FF:FF . i used w5500 own code for stm32f4. please if anyone of you who worked on w5500 for stm32f407. kindly note i already tested w5500 module with esp32 arduino its ok , seems like issue is with keil mdk code( might be clock).

I have a 380 lines code written in XC8 for a PIC 12F683 and I would like to port this code to MiikroC.

I am looking for an experienced embedded C programmer to add features to an existing Project. The project includes developing micro features using an ARM Cortex microcontroller and utilizing the Keil uVision toolchain. This is a long-term project and I am looking for someone who can handle it within the allotted time frame. Tasks will be done in multiple micro projects. Experience in 3G/LTE modules and BLE will have added advantages.

On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

Strong skills on Embedded C/C++ · Should have knowledge in HMI based GUI development with various HD icons, sliders, graphs and drop down menus · Hands-on experience on various microcontrollers AVR/PIC/ARM/STM32F4/Xilinx XC7Z020 · IDE experiences on AVR Studio/ MPLAB/Keil IDE · Peripherals like - UART/SPI/I2C/ADC/PWM FPGA interfacing includes C Code for: ADC IC with SPI interface. DAC IC with SPI interface. 12 Bit Parallel Data interface with DAC IC. 8 Bit Parallel Data interface with DAC IC for sine wave generation. 10 PWM channel interface. SDRAM interface. SD Card Interface. USB interface RS232 Interface Current Steering DAC interface interaction experience on FPGA Able to prepare and implement the Pre-production...

I have a Radar Sensor (IVS-947). Link: Datasheet: attached You need to write code for NUCLEO-F411RE board which will be connected with IVS947 radar sensor. The code should able to read number of moving objects within 80 meters, distance and their speed. The code can be developed in keil or STM32Cube. You should read the datasheet and write the connection between NUCLEO board and sensor. ** You must use Arm_CMSIS_DSP library for fast Fourier transformation which is the key for object detection. **It is needed to provide a simple GUI using matlab/python. Reference: attached

Hi, How are you doing. I am looking for electrical engineers to work on multiple tasks in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. I am looking for long term work relationship. New freelancers are warmly welcomed. Important Note: I need dedicated freelancers who strictly follow the deadline and give me good quality work without any plagiarism.

Looking for a long-term firmware/embedded engineer. Familiar with low-level embedded code on a microcontroller in embedded C. Most of the work will be microproject tasks for the long term. Code needs to be compiled and can be tested on any platform. Need to have experience on FreeRTOS , compilers like KEIL/IAR, external modules 3G/LTE module and BLE.

Hallo zusammen, Wir betreiben seit 20 Jahren einen Webshop für hochwertiges Besteck, Porzellan und Glaswaren. Aktuell suchen wir eine Person, die uns bei klassischen Backoffice Tätigkeiten unterstützen kann. Min. 20 Stunden pro Woche, 100% remote sind möglich. Aufgaben Kundenservice: Bearbeitung von eingehenden E-Mails und Anrufen während den regulären Bürozeiten zwischen 9 und ...Bilder) wären ein Plus Erfahrung mit JTL (Warenwirtschaftssytem) wäre ein Plus Vorteile Arbeit in einer sehr freundlichen und persönlichen, aber auch produktiven Unternehmenskultur Überdurchschnittliche Bezahlung und Boni bei guter Leistung Zuzahlung für benötigte Hardware (Laptop, Telefon, etc.) Wir freuen uns über jede Bewerbung und an...

I have a completed embedded project using couple sensors and modules written on mcuxpresso ide which uses frdm-kl25z nxp board. I want to make the project work on keil uvision5 ide but I have problems regarding transitioning the libraries etc. The whole project code and schematics are available, I just need to convert the required libraries and some simple code conversions in order to make the same project work on keil uvision5 ide.

I need a person to help me build a game similar to "simon says" using the program mikroC and proteus to simulate it.

I am looking for embedded guy who has worked with USB HID on STM32. My requirement is : The two STM32 devices are connected over USB line and communicating over HID class. Usually communication is uni-directional i.e device to host. But I am looking for bidirectional communication so that two STM32 devices can receive or transmit data with each other. Most prob...HID will be used. You can connect two STM32 discovery boards with USB over OTG cable to make the connection and one will act as device and other as host. I need an API routine which I can call to transmit and receive data on any side. For testing you can print the data on UART which received from HID and similarly, send the data from UART to HID. Make sure to use CubeMX for code generation and Keil IDE/Cube IDE for pro...