Qmk dz60 trabalhos

I have a mechanical keyboard with QMK. I'm looking for a programmer to write code that will flash its scroll lock LED every time a key is pressed. Key Requirements: - The LED flash pattern should be a simple, single flash. - The code should be tailored for the QMK firmware. Additional Information: - The LED flash behavior does not need to remain consistent across different devices, and it's acceptable to reconfigure it for each device. Keyboard PCB is a KBD75 VIA software is installed and working Example video:

I am looking for someone to design a two pcbs with similar specifications that have similar designs and features to most mechanical keyboards seen today. The first is one for a TKL (80%) layout. The second is a 75% exploded layout. Both of them need to have the following specifications: needs to fit a sleek and simple designed keyboard Keyboard Layout: TKL and 7...The first is one for a TKL (80%) layout. The second is a 75% exploded layout. Both of them need to have the following specifications: needs to fit a sleek and simple designed keyboard Keyboard Layout: TKL and 75% (exploded) Copper Thickness:1oz Board Thickness:1.6mm-3.2mm Layer:1-18layers PCB Material:FR-4 Copper Thickness:1 oz RGB: yes HotSwap: yes Switch Pins: 3 Interface: USB-C Standard: ANSI QMK/Via support Anti-gho...

This Reddit post I made describes the issue I'm having with QMK. If you can help please bid the amount you can help for.

This Reddit post I made describes the issue I'm having with QMK. If you can help please bid the amount you can help for.

I have a raspberry Pi device installed Stretch Debian OS. I want to use Keychron K8 Pro QMK/VIA keyboard on my raspberry Pi device and remap the keys of this keyboard with QMK/VIA tool.

We have finalized the QMK Firmware for one of our products and we are looking to finish the last piece which is the RGB Mapping. A simple job that will require 1-2 hours at most if you are familiar with C/C++, QMK, and Circuit diagrams.

Hi. i want to set my qmk keyboard code able to recive led controlling commands using their raw hid api . Or alternatively to set it using via or vial , or openrgb repo's. Just to make it work properly. Please offer only if you have good experience with qmk code .

hi there i have custom 2 languages keyboard layout and i need to design and build my keymap firmware using QMK firmware

We would like to add our new upcoming products into the open-source project called QMK. We already have a few products that exist in the open-source QMK platform. We have some examples and firmware that have been built with our new product changes as a solid starting point. 1 full keyboard product needs to be adopted into QMK ( & VIA) 1 full other keyboard product (4 different layouts) that needs to be adopted into (VIA)

Outline of the requirements are: - 84/85 keys layout (ISO/ANSI), pcb must support both. - Support for USB Type C and or USB Mini - ESD protection, Fuse protection - RGB for each key or RGB Underglow - Indicator LEDs (Caps Lock, Num Lock and Scroll Lock) - Cherry MX Switches compatible (hotswap modules for MX style switches) - Full anti-ghosting - QMK / VIA compatible

I want to add rotary encoder function to my qmk enabled mechanical keyboard. I have a preonic.

I am looking for a designer/ producer to make a -20 switch numpad with a rotary encoder, ( standard layout with the swap of top right being an encoder) -have firmware be QMK or VIA compatible -Usb C -wireless Bluetooth 5.0 or higher -can be used in wired mode and wireless ( not just for charging) -would need a copy of pcb design ( Gerber, bom files etc) and firmware flashing, -hotswapable -Bluetooth pairing button -re-flashable, and teach me how to flash from factory **400 USD is just for design work. - I will pay additional costs for you to get the PCB and component samples produced shipped to you for testing etc and have the factory solder the components on. **delivery would be 3 working PCB with components all factory soldered on (I will source my own switches, case...

I would like to have someone design me a mechanical keyboard PCB. Output are the files of the design. Here are the specs: - 75% layout (~84-ish switches) - Support for USB Type C and/or USB Mini (maybe through a daughterboard) - ESD protection, Fuse protection - RGB underglow - Indicator LEDs...like to have someone design me a mechanical keyboard PCB. Output are the files of the design. Here are the specs: - 75% layout (~84-ish switches) - Support for USB Type C and/or USB Mini (maybe through a daughterboard) - ESD protection, Fuse protection - RGB underglow - Indicator LEDs (Caps Lock, Num Lock and Scroll Lock) - Layer indicator RGB LED - Cherry MX footprint - should be 100% QMK compatible - Maybe hotswap modules for MX style switches - Maybe per key single-color...

Hi, i would like someone to design a custom keyboard PCB Specs: - 75% layout (will provide exact size and example). - Support for USB Type C - ESD protection, fuse protection. - Underglow with support for 4 pin SMD Addressable RGB LEDs - Per key backlighting with support for 4 pin Reverse Mount SMD Addressable RGB LEDs (example ) - QMK compatible.

Hi, i would like someone to design a custom keyboard PCB Specs: - 75% layout (will provide exact size and example). - Support for USB Type C - ESD protection, fuse protection. - Underglow with support for 4 pin SMD Addressable RGB LEDs - Per key backlighting with support for 4 pin Reverse Mount SMD Addressable RGB LEDs (example ) - QMK compatible.

Need someone who is proficient in QMK to write some custom 'any key' code for various macros.

...experienced with QMK to work on a number of macros. I need a few macros but some are more pressing than others. I would also like some guidance on how I can do some of these myself and hoping to learn the basics, so I will ask you to explain things at times if that is ok. So first one is ALT TAB. I was really surprised QMK did not have this in the Quantum tab! 2. Show all windows such as swipe right on windows 10. I should have added that would be Windows + tab 3. Ctrl+Alt+Shift+S 4. forgot CTRL G 5. Windows Key Left arrow This is what I found online as a template. enum custom_keycodes { QMKBEST = SAFE_RANGE, }; bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case QMKBEST: if (record->) { // when keycode QMKBEST is pressed SEND...

...Centriod/Pick&Place, QMK firmware file) and 3D design files of the case & plate. Requirements PCB: - Standard keyboard buttons and functions apply - USB Type C to USB type A for wired input to supply power and data, support up to 5v 2a charging speed - Bluetooth 5.1 module with connection for 2pin battery pack - Standard used Atmega32u4 micro controller - Able to switch between bluetooth and wired mode - able to connect 3 bluetooth device at once and switch between them (eg, PC, MACBOOK & IPAD) - Supports Mac and Windows - ESD protection, Fuse protection - N key rollover/Anti-ghosting - RGB undeglow : 8 at top and bottom row, 2 in the middle column left and right - North facing Per key RGB led - Custom RGB effects (will provide video for effects later) - Cherry MX f...

...and the Firmware for a computer keyboard. Proficient in coding Firmware using QMK, and proficient in PCB design - preferably using Protel Altium Designer, or able to import/export Protel/DXP or another format so we can work together. We currently have (and will provide) a PCB file already designed in Protel/DXP, working with the MCU BYK816, designed to use optical infrared mechanical switches, single LED per key, plus LEDs for Caps/Num/Scroll. The work: We need you to verify/correct any issues on the PCB and change the MCU so it works with the QMK Firmware. For MCU, we can consider ATmega32U4 or an MCU that works with the QMK Firmware. The MCU must be upgradeable via USB. You would also need to fork/edit the QMK Firmware and adapt it to our patented lay...

Looking for someone experienced with QMK to work on a number of macros. I need a few macros but some are more pressing than others. I would also like some guidance on how I can do some of these myself and hoping to learn the basics, so I will ask you to explain things at times if that is ok. So first one is ALT TAB. I was really surprised QMK did not have this in the Quantum tab! 2. Show all windows such as swipe right on windows 10. 3. Ctrl+Alt+Shift+S 4. forgot CTRL G 5. Windows Key Left arrow re number 2 above, I should have added that would be Windows + tab

Looking for someone experienced with QMK to work on a number of macros. I need a few macros but some are more pressing than others. I would also like some guidance on how I can do some of these myself and hoping to learn the basics, so I will ask you to explain things at times if that is ok. So first one is ALT TAB. I was really surprised QMK did not have this in the Quantum tab! 2. Show all windows such as swipe right on windows 10. 3. Ctrl+Alt+Shift+S 4. forgot CTRL G 5. Windows Key Left arrow

Looking for a keyboard PCB designer. I have already designed a custom keyboard case but still need a design for PCB to start prototyping. Specifications: - 65% Layout - ANSI and ISO support - Split backspace, stepped capslock - Tsangan bottom row - Support screw-in stabilizers - USB-C through daughterboard - ESD protection, Fuse protection - Cherry MX footprint - QMK compatible - Name/Logo printed

Only apply if you know what QMK firmware is, how it works, and are confident you can implement a custom keyboard that would require a custom QMK protocol. I have a custom keyboard controller, and firmware that I'd like to make compatible with QMK. The firmware's matrix scanning, key sending etc. are all implemented. The task is to port the existing firmware's functionality to QMK. Requirements: - Must be flashable via USB (instructions required) Resources: - Original Firmware () - Project log () - More details on issue () Example QMK Fork using the same SOC (nRF52840) -

I need an expert in QMK software, I have already worked on the pcb design.

I need an expert in QMK software, I have already worked on the pcb design.

We would like a keyboard PCB designed with the following specifications: -5 pin cherry switch support -Per-key lighting RGB embedded in-board to avoid interference with switches -Compatible with Unified C3 Daughterboard by ai03, Wilba, etc. (We may decide to change this) -Mounting holes as specified -Silkscreen logo -QMK Support

We would like a keyboard PCB designed with the following specifications: -5 pin cherry switch support -Per-key lighting RGB embedded in-board to avoid interference with switches -Compatible with Unified C3 Daughterboard by ai03, Wilba, etc. (We may decide to change this) -Mounting holes as specified -Silkscreen logo -QMK Support

We would like a keyboard PCB designed with the following specifications: -5 pin cherry switch support -Per-key lighting RGB embedded in-board to avoid interference with switches -Compatible with Unified C3 Daughterboard by ai03, Wilba, etc. (We may decide to change this) -Mounting holes as specified -Silkscreen logo -QMK Support

We would like a keyboard PCB designed with the following specifications: -5 pin cherry switch support -Per-key lighting RGB embedded in-board to avoid interference with switches -Compatible with Unified C3 Daughterboard by ai03, Wilba, etc. (We may decide to change this) -Mounting holes as specified -Silkscreen logo -QMK Support

Looking to have a keyboard PCB designed to be flashed as per the specified layout. We are looking for the following specifications: -QMK Support and programming -5 pin cherry switch support -Per-key lighting RGB embedded in board to avoid interference with switches -Compatible with Unified C3 Daughterboard by ai03, Wilba, etc. -Mounting holes as specified -ESD protection on both data and power lines -USB shield decoupling -Overcurrent protection via fuse -Overvoltage protection via fuse -May require case grounding and decoupling (unsure)

I need your help developing a firmware for the adafruit feather 32u4. I am building a custom keyboard with this controller. I already have most of the code here. It just needs a little bit of extra work.

I want to create a keyboard with a custom layout, that is easy to use for typing in the Tamil language. I have already designed the layout. I need to the schematics and PCB designed. I also need the firmware to be programmed. Open source, readymade schematic generators and firmware software like QMK can be used. I also need suggestions regarding microcontroller.

I would like to have someone design me a mechanical keyboard PCB. Output are the files of the design. Here are the specs: - 75% layout (~84-ish switches) - Support for USB Type C and/or USB Mini (maybe through a daughterboard) - ESD protection, Fuse protection - RGB underglow - Indicator LE...would like to have someone design me a mechanical keyboard PCB. Output are the files of the design. Here are the specs: - 75% layout (~84-ish switches) - Support for USB Type C and/or USB Mini (maybe through a daughterboard) - ESD protection, Fuse protection - RGB underglow - Indicator LEDs (Caps Lock, Num Lock and Scroll Lock) - Layer indicator RGB LED - Cherry MX footprint - should be 100% QMK compatible - Maybe hotswap modules for MX style switches - Maybe per key single-color...

Hi David, I have a question, or some possible work, we have designed a PCB to be used with QMK *arduino based* firmware to map mechanical switches on a PCB and then we also connected a Potentiometer to it, I would be interested in if you could possibly code us a modified version of the existing firmware so that QMK can work with the potentiometer and give us MIDI output.

I require someone who can design a PCB for my MX Mount Mechanical Keyboard. Preferrable is the use of KiCad. The Keybord needs to be powered by QMK Firmware and be created with a ATMEGA processor, the keyboard will have LEDs and some functions that will be discussed. Someone who can tweak the QMK firmware would be appreciated.

Hello I am look to have a keyboard designed for a keyboard kit. 40 keys full rgb back lighting per key must support tmk and qmk keyboard firmware