Design a PCB with a RF module + SDCARD + PIC32

I'm looking for a freelancer that can design firmware and a PCB. The PCB: - single side PCB, 4 holes for fixing, 60 x 70mm; - will host a rf module, sdcard socket, 2 LEDs, 1 pic32 (thought hole mcu), tension regulator, a 2 buttons and some other resistor, xtal, and so... - must be designed in EAGLE 5.7 !!!! (this is important, i don't have license for other version!) - more details can be discussed in future; The firmware: - will communicate with the rf module using one serial port at 115.2Kbps - there must be a routine to initialize the rf module - there must be a routine to set some parameters on the module when the button is pressed - the second serial port will be used too, it will read a buffer in the ram of the pic, and, using DMA, the data will be sent over this serial port. - the SD card will not be used at this time... but is good to have an example how to read and write a file on it (use the MDD filesystem or other) Datasheet from RF module, PIC and enclosure dimension: [login to view URL] what I expect at the end of the project: MPLAB X working/compiling project written in C for the PIC32 EAGLE 5.7 sch+brd file