NXP LPC2129 In-Circuit Prgramming

I am looking for a program in C or C# that will program an NXP LPC2129 (MCB2129) over the serial port using the standard Intel Hex file format produced by the Keil MDK. The software will run on WinCE 5.0 in either C or C# with the .NET CF 2.0. The details of the LPC2129 boot format is in the UM10114 manual and it uses UU-encoding. The program must handle the Boot mode pin, and the Reset pin, and over write copy protected programs, without a manual reset. The software will have no user interface and should offer facilities, such as :- * Erase the whole Chip * Program Chip given the filename of the Intel Hex format file. * Verify Programming is correct * Failures and errors to be reported. * The program must open and close the COM port as appropriate Please indicate if you use the Kiel ARM MDK, and if you have a LPC2129 based board to test your software with, also whether you intend to write in C or C#. ## Deliverables Please indicate if you have a Keil MCB2129 or similar board to work with, and if you use the Keil ARM MDK.