Openvpn arm trabalhos
I need touch ups on my daughter’s yearbook photos (3-4 photos), rush/same day delivery. Edits include removing stray hairs, closing a gap in her dress at chest, smooth lips and dress wrinkles, adjust face shadow. Possibly remove part or all of necklace, possibly straighten her bent arm (or remove bracelet and nailpolish if we cannot straighten it)
OpenVPN configuration using pfsense firewall server
I need to setup openvpn to all the servers in cloud and need to setup site to site vpn between different zone in cloud like delhi region to mumbai region, servers should be site to site and in sync.
Project Background ----------------------------------- We currently develop on a Linux VM on Parallels, running Ubuntu 14.04 LTS with a 32-bit architecture. Our dev tools include Qt Creator v5.8.0, Qt Linguist v4.8.6, and our compiler is arm-linux-gnueabihf-acc with the target Linux embedded device being a TI ARM Cortex Sitara (32-bit) processor. We would like to move from Parallels to a more native solution, both for Windows 10+ and macOS 11 ("Big Sur")+. We would like to stay away from paid licensed software like Parallels and ideally avoid VM-based solutions. While we will still consider VM-based solutions, non-VM solutions will be given preference unless it presents clear advantages over a native & cross-compiled solution (WSL solutions for Windows will als...
a robot arm which is able to transfer light weight depends on materials
Robotic arm from Ufactory need to program to receive order from kiosk and start working on the order required python skill and robotic arm experience who based in Sydney
I want a robotic arm with 30 degree swivel. The arm consists of two parts, upper and lower. the connection between these two can be a ball to enable the swivel with 30 degree or any other mechanical part that can enable swivel. the upper arm at the end should have a piston technology, that can be controlled by a controller in the unit, for now the piston can be set to manual up and down with adjustable speed button.
...designed fully stand alone The alarm panel will consist of Arm Home, Arm Away and will have the option to disable the specific 24 hour zones or reset a sensor like a some sensor which has been triggered . Arm Home will be for arming the system while your are at home or sleeping so that internal motion sensors or internal rooms which have contacts do not trigger the alarm. Arm Away will arm all internal and external zone that have been added to that group. For each one of these conditions grouping should be available. Example Zones can be moved to any one of the condition groups like moving a door to or the groups so that if it is part of that group it will abide by those conditions I should be able to more a zone to or from arm home or aw...
Looking for Azure consultants for some of our customers. Preferably someone in the greater Oslo region (NO) or in Stockholm (SE), but we don't exclude consultants w...residing in other parts of Norway and/or in Sweden as well. In general, this is the skillset we are looking for: - At least 5 years relevant working experience within the IT industry, from operations and/or development - At least 3 years hands-on technical experience with Azure - Experience working with Infrastructure as Code (IaC) - Solid experience with PowerShell, Bicep and ARM - Good experience with Azure DevOps - Good verbal and written communication skills in English - Experience with Kubernetes is a plus, but not a requirement Please feel free to reach out even if you don't &...
Garrett Gurthie is a professional disc golf player. Just like ball golf, but w discs. His nickname is DoubleG. I am including two logos that he already has. One is of his beef jerky brand, and the other is his signature. However, we want the logo to use the name DoubleG and not GG. This logo would be on shirts, short...and the other is his signature. However, we want the logo to use the name DoubleG and not GG. This logo would be on shirts, shorts, hats, discs etc. Here are some high lights. he is know for his distance. He can throw very, very far. I would like to have an outline of his image when throwing worked into the logo. He has a unique throw, where his left arm goes up in the air near his head. No other player throws this way. See images
In the attached family photo the man's back is bent. Straighten, have him stand up straight and naturally, making adjustments as necessary to fix any resulting distortion in the other elements: car, child's arm, etc. Second part is to adjust dog's ears to match the angle of the dog photo attached. Use the keyword HAGAJI in your bid to show me that you're not a bot.
I have three passions in in my life I would like to roll into one decal. I am an orthopedic trauma surgeon whom relaxes by doing custom metal fabrication and engin...can put on the side of my race truck. I would like the design to be able to be cut out from a sheet of single color vinyl and be able to use the color of whatever surface I put it on as the “ negative space” to make the design stand out. I hope that makes sense . I was thinking a circle design with a crossing decal in the center. one arm of the cross being an orthopedic trauma theme such as a broken femur repaired with a metal rod or a plate. The other arm of the cross being a Motor theme such as a piston and rod assembly. Around the perimeter of the circle I would like the script “ IF YO...
Hi Gerson, This is the re-launched butler project we are already working on because you didn't accept the last one in time. We will create a single base butler design that we will then make all sorts of different hair and eyes and facial expressions and hand props for. The fixed fee would be for 1 x Butler base body + arm/hands variations; 8 hair styles; 8 diff facial expressions (eyes, mouth, eyebrows), and say 10 props (eg. serving tray with various things on it). Interested?
I need to enable secure point-to-point connections between 4 machines (2 Windows, 2 Ubuntu) on my home network and 2 developers I work with, without exposing other machines on my home network. I'm thinking OpenVPN + some sort of subnet or network partition (I have a Peplink BalanceOne router and switch that can be configured as needed).
...structural o Mounting point for front suspension • 1 x top and seat panel including pillion removable pillion seat and rear wheel mudguard o seat panel needs to include mounting points for rear suspension • mounting point for rear lights and indicators Rear Swing Arm • 2 x single swinging arms o Mounting from the electric motor shaft – using the motor shaft as the mounting point for the swing arm bearing o Motor housing plate on the opposite side will contain the mounting for the remaining bearing and swinging arm o Swing arms to have mounting point for dual suspensions o Rear brake calliper o 17” x 6” wide rear wheel Front Suspension • Front suspension mounting point from the modular chassis o 30 deg...
I need someone to config and teach me how to do it
Hi George K., I have a very small python script, and need to run one function in 'multithread', or in 'parallel', not sure how you would call it, but I'm sure you would be able to do it, let me know if you are available to do this quick edit, thanks!
Hey all, I need a logo for a Dental-Website, it should contain the name of the doctor and under the name it should show a smile with both lips. The attached drawing shows you the name of the doctor and approximately the smile under the n...name of the doctor and under the name it should show a smile with both lips. The attached drawing shows you the name of the doctor and approximately the smile under the name. I am so excited to see your proposals. Kindly use this color code: #a2b92e If you need to integrate more colors, you can use black and/or a very light sandy/beige color. Kindly note: As you can see in the attached file, the arm of the last letter Y has to be associated with the upper lip of the smile. Please use a similar FONT like "Arethusa Pro Book" or Font &qu...
I want to have a basic 3D model for the creation of my avatar later on. I would like an avatar slightly in profile on the right, with the right arm up and the left arm along the body. No expressive face and an athletic body. DO NOT HESITATE TO PUT YOUR ARTIST TOUCH :) (No texture, No colour)
Hi I noticed your profile, and skills in ARM. I'm about to embark on a new work project involving this language. I'm looking for a long-term freelancer to assist us with creating unique features in ARM assembly. Would you be interested?
Hi Evgeniia S., I noticed your profile, and skills in ARM. I'm about to embark on a new work project involving this language. I'm looking for a long-term freelancer to assist us with creating unique features in ARM assembly. Would you be interested?
I have an existing Web Application (.Net Framework 4.6.1) that has MVC Areas, and i need someone to simply add the necessary con...their application work inside our existing app. NuGet packages for all necessary Telerik Reporting Modules have already been added to the project and dependency conflicts resolved. Receiving the following error when i attempted to do it myself. 1/13/2022 12:43:03 AM - /ARM/ReportDesigner/Index -> (0x80004005): The controller for path '/ARM/ReportDesigner/Index' was not found or does not implement IController. My exceptions are only to get their demo application working inside our application and at a point where i can further configure it for our needs.
Hi Evgeniia S., I noticed your profile, and skills in ARM. I'm about to embark on a new work project involving this language. I'm looking for a long-term freelancer to assist us with creating unique features in ARM assembly. Would you be interested?
Hi Evgeniia S., I noticed your profile, and skills in ARM. I'm about to embark on a new work project involving this language. I'm looking for a long-term freelancer to assist us with creating unique features in ARM assembly. Would you be interested?
I have an unmanaged cloud VPS with admin access (DirectAdmin installed). The VPS has multiple unused IP addresses. With a 4G LTE router, I want to make a connection via OpenVPN to the VPS and use one of the public IP address assigned to my VPS.
This is to put on the front of a sweat shirt. Write “anime forever” and then on the left sleeve put two samurai swords crossing and an arm band.
Por favor, Cadastre-se ou Faça Login para ver os detalhes.
Hi Gerson Eric P., Unfortunately f/lancer cancelled the contest. I have a different project for you if you’re interested. Can you draw “English Butlers”? I need to create a single base design that we will then make all sorts of different hair and eyes and facial expressions and hand props for. The fixed fee would be for 1 x base body + arm/hands variations; 8 hair styles; 8 diff facial expressions (eyes, mouth, eyebrows), and say 10 props (eg. serving tray with various things on it). Interested?
Openconnect websocket Openconnect Openvpn websocket Openvpn Pptp L2tp Any connect
...2-D animations. We're using the animations to create explainer videos/ marketing videos for companies. We have an illustrator who will be creating your designs. We would need you to simply animate the assets. What matters to us is that your animations are fluid and that your 2D characters are animated with life-like movements. We don't want to see your characters move just one portion of their arm over and over again. Please include with your submission 3 and ONLY 3 examples of your best, most recent work. Illustrations or videos are welcome. Links only please, do not attach files. Our Top candidate must have great communication! You need to be proficient in English and responsive within a reasonable amount of time to any of our communications. Our Top Candidate mu...
I want an infrared device that can scan for pain points in any living body. eg: if someone pinch you on the arm depending on the heat signature or any other parameter that can be used to recognize the pain in that area should be identified by the device and give a yes or no answer as output.
...throughout with longer hair in up style b) to change colour of cushioning to brand green - Hex:6bc1b7 c) to remove couch roll barrel from under bed d) on image 2 in attachment to drop cushioning to chest height and have model shown laying head to side on top of cushioning comfortably e) on image 3 in attachment do version as is with colour change to cushion AND version with left arm under body and coming out with right arm in more prayer natural position f) in image example 5 on attachment - show this variation with new model and cushion colour AND a version with smaller towel roll under knee and a small one under ankle AND a version with client lay flat with smaller roll under knee and ankle (3 variations in total) g) variation of our female model sat on a lowered tr...
I am looking for someone knows Arm Cortex M0+ assembly language. I want both startup and a main code in assembly in Keil environment for my project. The project requires creating interrupt handler with systick timer. Can you do it?
I am looking for someone knows Arm Cortex M0+ assembly language. I want both startup and a main code in assembly for my project. The project requires creating interrupt handler with systick timer. Can you do it?
Need to have a website built for a Medicare start up. My company will operate as a sales arm for Individual Medicare plans using a provider (of Individual Medicare plans) to market and sell to Corporations of all sizes nationally. I need someone who has experience with Building sites that limit keystrokes with this population (over 60 years old) in mind. Someone who has experience embedding links, dropdown menus that retirees can easily access and understand. My company will basically be a Broker for Individual plans.
The developer will create a skeleton - type model using OpenSim, that will be able to calculate the parameters of the muscles that are activated during an elbow extension of the arm, based on the picture that we exchanged on chat, which shows that the arm is at the level of the eyes. The developer wil have also to provide a demo video of the result and the file he will sent must produce the same result on my machine
looking for Azure devops training specially ARM template with automation account runbook with PowerShell and python
We would like create an openvpn client app with lots of .ovpn profile inside (1 profile for 1 country) like NordVPN or expressvpn.
We need more versions of the same character We're looking for custom illustration art (NO COPY PASTE PLEASE) 10 different set of teeth (2 of them epic) 10 different sets of eyes (2 of them epic) 5 combinations of arm + item 5 body + items
Hi Tencho D., I saw you won a project where you coded the Hangman Game in ARM Assembly x32. How much would it cost to buy it?
Its not so hard to complete. The faster you complete it the better
Hi Hemant Liladhar R., I noticed your profile and would like to offer you my project. We can discuss any details over chat.
Requirements: - build GUI OpenVpn client applications for Windows and MacOS - GUI design should refer to our design (in Figma) - Backend API will be provided so that no backend programming is needed #MacOS - use Tunnelblick as the open source project to start with #Windows - use OpenVPN/openvpn-gui as the open source project to start with
...appropriate menu item (File-> Score Table). Fig. 4: Example Hangman game Help Menu The About (Help->About) option should pop-up a small window that contains information (Name, Surname, School Number and Email) about the application developer (Fig. 4). Every time a player fails to identify a character in the hidden string, one of the six body parts – head, torso, left arm, right arm, left arm and right arm – should be added to the picture. After the sixth failed attempt game should and the player should be notified that it has lost the game. Last but not least, if a player would like to exit the game should click on the relevant menu item (File->Quit). [BONUS] The application should play relevant sounds after each ...
Dear Developer's I Need Following Requirements Panel if you can do this please drop your best offer, VPN Management Administrator Panel, if you already done like that project than welcome without experience do not share anything with me Openconnect & OpenVpn Panel with Following Requirements Administrator Panel 1 : Login for each User 2 : Administrator Panel 3 : Admin panel 4 : Reseller Panel 5 : Unlimited VPN Accounts/Resellers 6 : Bulk VPN creating and download through Microsoft Excel 7 : Add IP address for server changing in Android Application without any update 8 : Create VPN for 30,60, 90, 180,365 days 9 : Automatic VPN expiry SQL Database 10 : Firebase real-time database In status show online users, active users, inactive users, suspend users 11 : Import and expo...
Need to install openVpn on ubuntu server and configure to use the same ip
We are looking for someone to build a VPN Authentication Controller/API to install, update, create users and remove users from remote servers, it will also need to set up the packages required. A VPN Controller that acts as a hub to add/manage servers Manage user accounts that can be accessed via REST API and will contain user login + expiry date. Install OpenVPN and Wireguard onto new servers automatically. Wireguard connectivity We will have Mobile/Desktop Apps so we need the users to be able to log in via Email/Password then the connection details are generated in the back end. As soon as they click go everything is then connected.
I want an animation of the logo done. The logo has a vinyl record in the background and the “y” in “The Needyl” serves as the arm of needle for playing the record. I want the animation showing the “y” (the arm of the needle) rotating onto the record and the record begins playing (spinning). Essentially the “y” can start roughly about 45 degrees counterclockwise of its original position, then when the animation begins, it will move to its original position This video captures the idea: I hope this makes sense
Hi, I would like to remove a tattoo from the left arm in the photo
Hi Arm M., I noticed your profile and would like to offer you my project. We can discuss any details over chat.