Arduino Sketch for uBlox5 GPS via I2C
$30-200 USD
Pago na entrega
Write a sketch for the DFRobot Arduino Mega micro-controller which is capable of reading from a gps connected to the I2C.
The following are the components we will be using to test the sketch
<[url removed, login to view]>
<[url removed, login to view]>
The nav board will be connected to the 3v power and to the i2c on the board.
## Deliverables
The purpose of this project is to write a sketch which will use the DF Robot Arduino Mega Microcontroller and uBlox5 GPS/
The sketch must communicate to the gps over the controllers I2C interface.?
The sketch must contain the following methods
1. Setup()
2. Loop()
3. Any GPS methods required. The point here is to set up a few methods that will be provide readings for the GPS
The sketch must only use what is available in the arduino libraries.?
Here are the components this sketch needs to work for:
[[url removed, login to view]][1]
<[url removed, login to view]>
The previous link contains the actual gps component that is required. you can use either that product or any other product that provides the same component with an i2c interface.
Furthermore, you will need to download the following software in order to develop the sketch and test it.
[[url removed, login to view]][2]
ID do Projeto: #3248887
Sobre o projeto
3 freelancers estão ofertando em média $142 nesse trabalho
