Design a Conference Banner

Status: Closed
Prêmio: $300
Inscrições Recebidas: 1
Vencedor: wahdinbarjib

Winner

Síntese do concurso

CAPIC is holding its annual National Citizenship & Immigration Conference soon and we need someone to design the banner that will go behind the stage. We will have one single piece to cover the entire wall behind the stage.

The screen section is 13ft X 13ft. It should have a 10ft x 10ft screen in the middle, toward the top. I suggest not to put anything on both sizes, as it will cause issues if the powerpoint is in widescreen format (9ft X 12 ft). Something underneath the screen may work.

There will be four spacers that will be inserted to each side, in between the stage and the screen, and on both ends. Please find attached the overall setup. The spacer sessions can be added, removed, or relocated to accommodate the size of the stage.

The sizes are in cm, not in inches, as the printing uses centimetres.

The 4mx4m is about 13ftx13ft so our backdrops can go as high as 13ft, that's the tallest size we can print. Very close to the original idea of 14ft.
For the projector walls please have at least 10ftx10ft size clear window in the design to project on it.

Kindly please make the bleeding size as the banner real size, and here are some points about design details:

1) Make sure right bleeding size as templates, and fill all the bleeding size with background color.
2) Make sure the color mode is CMYK, not RGB.
3) The artwork resolution is between 72dpi-125dpi, make sure all images are clear enough when zoom the design file to 100% ratio.
4) Make sure there is at least 5cm distance between the edge and the main images, because we will cut or sew the edges after print.
5) Make sure to change all letters into object lines, because sometimes our computers don't have the right font you used. Only Roboto is to be used in this design. Convert all final size fonts to curves.
6) When you send the printing files, normally pdf version, kindly please also send a small resolution proof image at jpg version.
7) If the files are too big to send by email, please send by: https://www.wetransfer.com or dropbox.

NOTE: You may want to be inspired by a maple leaf design that we have used for other smaller banners for the conference (attached). Also attached is CAPIC's Brand Guideline, which is to be adhered to.

Habilidades Recomendadas

Winner

Lance um Concurso Como Este

Feedback do Empregador

“Very diligent and professional throughout. Had no problem making numerous changes. ”

rmcclem, Canada.

Painel de Comentários

Proprietário do Concurso
- 5 anos atrás
Will try to do so. However I need the project by 5pm EST latest.
- 5 anos atrás
1. c0d3rPK
  - 5 anos atrás
  Sure, I can work on it tonight!
  - 5 anos atrás
2. c0d3rPK
  - 5 anos atrás
  5PM EST Friday I hope? or is it 5PM EST Thursday?
  - 5 anos atrás
c0d3rPK
- 5 anos atrás
Judging by the amount of rejected and low rated entries; If the project can be extended for a day or so it would be great. I was working on a proper background however missed the deadline due to some personal matters I had to attend to. If possible please
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
We need to have all the background in linear (curved). This should be done in Adobe Illustrator as an .AI or .EPS format vectorial. Therefore, when printing the final product would look sharp and not pixelated.
- 5 anos atrás
Jokey05
- 5 anos atrás
please wait my entry.... working..!
- 5 anos atrás
emranadobe24
- 5 anos atrás
Working. Plase wait for design.
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
We will need both the PDF version and jpeg version for proof.
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
1) Make sure right bleeding size as templates, and fill all the bleeding size with background color.
2) Make sure the color mode is CMYK, not RGB.
3) The artwork resolution is between 72dpi-125dpi, make sure all images are clear enough when zoom the design file to 100% ratio.
4) Make sure there is at least 5cm distance between the edge and the main images, because we will cut or sew the edges after print.
5) Make sure change all letters into object lines, because sometime our computers don't have the right font you used.
6) When you send the printing files, normally pdf version, kindly please also send a small resolution proof image at jpg version.
7) If the files are too big to send by email, please send by: https://www.wetransfer.com or dropbox.
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
Final information before selection:
- 5 anos atrás
maryamnazargol
- 5 anos atrás
#extended
- 5 anos atrás
Nocturnedesign
- 5 anos atrás
Please check #25 it's all editable and printable as you wish. I hope you like it.
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
You could also approximately where the major cities are (Montreal, Toronto, Winnipeg, Calgary, Vancouver) little mini skyline silhouettes of those cities in those places?
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
Here's a thought: you can have a kind of topography at the bottom, like a silhouette that runs across everything at the bottom reflecting Canada's topography (West to East). So the Rockies shape would be somewhere on the left, perhaps under the main stage to the left of it.
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
Shanmuganathan R.: Look at the attachments. All you need is the NCIC logo, and you may take inspiration from the leaves on our other banner (which was also attached). The dominant colour should be white or off-white
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
Please try to have the dominant colour be white or off-white
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
As some other designer have designed exactly this for me, I don't see how it's that confusing.
- 5 anos atrás
1. DEZIGNWAY
  - 5 anos atrás
  Exactly what? What are the contents you need to put on the panels?
  - 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
Again, this is the order: spacer, screen, spacer, stage, spacer, screen, spacer....and design according to the dimensions provided.
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
Hi Shanmuganathan R.: 4 spacers each with a design on them, one stage with a full design, two areas underneath a left and right PP screen (which should be left empty) with a design on it.
- 5 anos atrás
DEZIGNWAY
- 5 anos atrás
Dear Sir / Madam, Still your brief on this project is confusing. could you please provide a proper brief for us ? thank you
- 5 anos atrás
satishchand75
- 5 anos atrás
HI Sir, I am working on it. as your guide line. thanks
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
The layout should be the following: spacer, screen, spacer, stage, spacer, screen, spacer....and design according to the dimensions provided.
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
One more thing: Omit anything that is specific to this year's conference as it will be re-usable for other years.
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
Hello Hania, it is up to you.
- 5 anos atrás
hsouiti
- 5 anos atrás
Hello,
I am working, can you #sealed the contest please.
Best Regards
- 5 anos atrás
Hania501
- 5 anos atrás
do you want some design in the spacer section too or just in the stage section? - according to the map you gave
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
No CAPIC logo!
- 5 anos atrás
Proprietário do Concurso
- 5 anos atrás
It's entirely up to you. Try to make it professional and subtle. It's a conference on immigration and citizenship.
- 5 anos atrás
protttoy
- 5 anos atrás
Should the design be an abstract one ? Because you did not provide any actual content to be displayed on the banner itself. Just the logo and a design based on maple leaves will suffice ?
- 5 anos atrás