Find Jobs
Hire Freelancers

Plate Heat Exchanger

£18-36 GBP / hour

Concluído
Publicado há mais de 3 anos

£18-36 GBP / hour

We require a counter flow ceramic plate heat exchanger designing. 0.4 Kg/s air both sides Flow1: 150C to 1600C 2.68 bar Flow2: 1560 to 190C 0.1 bar Maximum pressure drop 0.1 bar I was thinking of the plate gap being 0.6mm with laminar flow but am open to other thoughts Milestone 1 will be simple approximate sizing and heat flows. Design of the ports will not be required at this stage. Further milestones going up to full CFD analysis on Ansys or some similar package and thermal stress analysis.
ID do Projeto: 26896813

Sobre o projeto

27 propostas
Projeto remoto
Ativo há 4 anos

Quer ganhar algum dinheiro?

Benefícios de ofertar no Freelancer

Defina seu orçamento e seu prazo
Seja pago pelo seu trabalho
Descreva sua proposta
É grátis para se inscrever e fazer ofertas em trabalhos
Concedido a:
Avatar do Usuário
£0 GBP em 40 dias
5,0 (1 avaliação)
2,9
2,9
Avatar do Usuário
Hi there, I am an Aerospace Engineer with MS in Aerospace CFD (Computational Fluid Dynamics). I have an experience of 3 years working with Government and private organizations. I have studied Turbomachinery, Aero Vehicle Design and Computational Fluid Dynamics as my core in MS program and have successfully completed several projects related to CFD and turbomachinery. Few examples are "Design and analysis of centrifugal Compressor and high pressure turbine for a turbofan engine", "Analysis of first stage of turbine exposed to UHTs", "Design and analysis of fan Compressor" and several other projects. All these projects are done in ANSYS with ICEM CFD as the meshing tool while Fluent as the solver. I have also formulated generic MATLAB and FORTRAN codes for AVD of different aircrafts and conduction, convection, diffusion, advection and convection-diffusion problems which involve solving heat transfer problems by incorporating efficient numerical techniques. I have also been working on ANSYS Fluent and CFX for past three years and have good experience working with the simulations of turbomachinery. All the projects are in my portfolio. I can share with you the list of projects I have completed and you can have a look at my portfolio as well for further details. Feel free to contact me any time. Looking forward to working with you. Thank you!
£22 GBP em 40 dias
4,9 (36 avaliações)
5,9
5,9
27 freelancers estão ofertando em média £26 GBP/hora for esse trabalho
Avatar do Usuário
Hello I'm Mohamed saeed Mechanical engineer with high experience in heat exchanger I have checked your job description and ready to help you
£27 GBP em 40 dias
4,7 (51 avaliações)
6,5
6,5
Avatar do Usuário
Hello, I am CAD/CAE/CAM expert mechanical engineer with many years' experience. Certified in SolidWorks on Expert level (CSWE) and extended CATIA experience I will design and analysis heat exchanger for you, according conditions you request. Your project in my hands is guaranteed Let me done you project. Kind regards!
£18 GBP em 40 dias
4,9 (70 avaliações)
6,1
6,1
Avatar do Usuário
Hi! Greetings! I am a Mechanical Engineer with expertise in Thermal Hydraulics. I have done projects that include Design of Shell and Tube Heat Exchanger, Design of Helical Coil Steam Generator, etc. Given my experience with thermal design projects, I believe I am the right person for this job. I can show you my previous work if you want. Kindly contact me to discuss further. Regards,
£25 GBP em 40 dias
4,8 (62 avaliações)
6,3
6,3
Avatar do Usuário
Hello sir/ma, I'm interested in taking this task up for you. I am a Mechanical Engineer with a masters degree in solid mechanics and a product optimization specialist by profession with 7yrs experience in Heat exchange, Mechatronic, FEA, Hydraulic actuator, Matlab,3D Modelling, CAD/CAM, AUTOCAD, CFD, NX Nastran, CATIA, Fluent ANSYS, Graphic Design, Product Design, Solidworks and expertise in simulation-based numerical optimization. I believe I am a good fit to complete your project. Once you share the project, I will have a look & confirm if I can do it. I’m honest, creative and a unique person to carry out your tasks given to me. Leaving your project on our hand is privileged; we'll make sure that the project is done in a perfect way and do our best until you satisfied. I would love to discuss this project with you and meet your exact requirements. I am confident I can provide you with top-notch materials that will fit your needs. I'm proud my work on being professional, of the highest quality and always delivered on time. you can hire me directly through this link https://www.freelancer.com/u/olaideejiwole
£18 GBP em 40 dias
4,7 (39 avaliações)
6,0
6,0
Avatar do Usuário
Hello I am a mechanical engineer having strong expertise of mechanical concepts in field of designing, thermodynamics, heat and mass transfer, heat exchangers. I have strong command on Solidworks, FEA modeling in solidworks and ANSYS and CFD simulation in ANSYS. I have done many mechanical engineering related projects successfully and with my experience, I assure you that I can do the counter flow HEX designing as per your requirements. I always provide high-quality work within the deadline and according to the expectations. I will be looking for a positive response from you. Regards Fariz Aneeq
£27 GBP em 40 dias
5,0 (34 avaliações)
5,4
5,4
Avatar do Usuário
I am Mechanical Engineer, Product designer and CFD Expert! I can send you my previous work as a sample to have a look. You can also checkout my portfolio. https://www.freelancer.com/u/doggar302?page=portfolio&w=f Chat for further details! Thank u!
£27 GBP em 40 dias
4,6 (14 avaliações)
4,5
4,5
Avatar do Usuário
Hello Dear Concern, We are a team of professional members of Electrical, Electronics, Telecom, Thermal, Solar, HVAC, Mechanical, Civil, Chemical, Energy, Industrial Engineering. We are also expert in following softwares: Embedded system, PCB DESIGNING, ARDUINO, ESP, MATLAB, Simulink, PADS, PORTEL,Proteus, Cadence ,Solidworks PCB, ANSYS, ABACUS, AUTOCAD, DipTrace, Kidcad, MATLAB, SPSS, PRO/E, CATIA V5, Stud pro, Homer Pro, We are trusted people and will never break you trust. We will deliver your work with in your defined timeline. I assure you that your work will be error free and 100% professional with high quality. We will never waste your time and money. We will try over best to make you proud. Please consider me for this job. Thank you in advance. Regards,
£30 GBP em 30 dias
4,2 (12 avaliações)
4,7
4,7
Avatar do Usuário
I am a CFD/FEA engineer with several years of practical experience of similar projects. I would like to make an offer for your project regarding the CFD simulation of your device. Let me know if you are interested. Kind Regards, F. Saric
£27 GBP em 40 dias
4,5 (8 avaliações)
4,4
4,4
Avatar do Usuário
Hi there, I'm a mechanical engineer with industrial experience. I'm an expert in heat exchanger design, CAD, and CFD. With skills in Siemens NX, Ansys, SolidWorks, and MS Office. I'll provide you the best quality with your complete satisfaction. Waiting to work with you, please share details in chat. Best regards, Abhijeet
£18 GBP em 40 dias
4,9 (10 avaliações)
4,1
4,1
Avatar do Usuário
Good day I am a mechanical design Engineer with work experience in computer aided design and computer aided engineering I will do your cfd simulation for Plate Heat Exchanger analysis by performing: -3D modelling of the heat exchanger domain in SOLIDWORKS 2019 -thermal fluid flow cfd simulation for the plate heat exchanger using ANSYS fluent It'll be a nice time working for you Best Regards
£18 GBP em 40 dias
4,3 (12 avaliações)
4,3
4,3
Avatar do Usuário
Hello! I have done plate heat exchanger during my Msc final project the task was including design calculation, 3D modeling and CFD simulation and last month i have done similar task on refrigeration and heat exchanger design, you can see my profile. https://www.freelancer.com/projects/mechanical-engineering/Design-Water-cooler-Heater-using/reviews definitely i will help you with this task, invite me to window chat i will share you more details and eager to work. Thank you, Amare A.
£21 GBP em 40 dias
4,9 (5 avaliações)
3,4
3,4
Avatar do Usuário
Hello, Aslam-o-Alikum. Dear Employer. Greetings of the day, I have studied your Project description & found interesting. I have done many project related to mechanical engineering, 3D modelling, product designing, CFD & FEA simulation, design analysis and manufacturing of sheet metal and structural assemblies. To brief about me: I am mechanical design engineer by profession and graduate in mechanical engineering with 5+ years professional Experience. ✫✫Main Skill✫✫ ☑️Machine design & manufacturing ☑️3D modelling ☑️Mechanical Engineering ☑️Product design ☑️FEA & CFD Analysis ☑️Structural design & Analysis ☑️Reverse Engineering ☑️Concept Development ☑️MS Project management ☑️Project Development ✫Design Tool Skill✫ ☑️Solidworks ☑️ANSYS ☑️Fusion 360 ☑️CATIA ☑️PTC-CREO ☑️AUTOCAD ☑️SIEMENS Star CCM+ ☑️ANSA☑️AUTOCAD ☑️INVENTOR ☑️MATLAB As I have professional experience for these type of projects and very confident to complete any project related to mechanical engineering field. My bid is negotiable and it depends on the required deliverable. Looking forward to hear from you & feel free to contact me Thanks & regards
£18 GBP em 30 dias
4,0 (17 avaliações)
3,4
3,4
Avatar do Usuário
Hi, Apart from my academic qualifications (which you can access through my profile), my experience in CFD and aerodynamics expand from academic to industrial projects, using CFD codes such as elsA, DLR-TAU, Gerris, Star CD and Ansys FLUENT. For instance, currently I am working on a propeller optimisation project which involves the design of an optimised propeller using low fidelity numerical tools to high fidelity CFD simulations, through my own company. My company specialises in aerodynamics and computational aerodynamics. My first project on this platform which is also in CFD, is also currently underway, nearing completion. Prior to starting my own company I have worked as a Mechanical Engineer in design offices in building services and ship building. I will use Ansys FLUENT and other Ansys tool boxes for this project and any geometry modelling will be done in CATIA V5. What is your time frame for this project? Is CATIA okay for you, or should I use Solidworks specifically? I have quoted the least rate because I am new to freelancing here, but not to aerodynamics or CFD. Anticipating a positive reply, Thank You
£18 GBP em 40 dias
5,0 (3 avaliações)
2,6
2,6
Avatar do Usuário
I have a PhD in Fluid Mechanics from the University of Toronto and is well versed in all computational and analytical software. Dominant person - catia - Inventor Dynamic analysis with Adams- Static analysis with abaqus and ansys *** Special design of hydraulic, pneumatic and hydraulic circuits 3D -autocad- solidworks -editvideo - and Photoshop Numerical calculations with Matlabe Familiarity with the appropriate element Optimizing and providing industrial advice on mechanisms We hope to be able to work with dear friends sincerely and professionally. Thank you very much
£27 GBP em 40 dias
0,0 (0 avaliações)
0,8
0,8
Avatar do Usuário
Expert in oil and gas equipment designing
£30 GBP em 10 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
Hello Dear, I am an aerospace engineer, expert and certified as an Associate in mechanical design from DASSAULT, SolidWorks ( CSWA certificate). I am also familiar with Ansy and studied CDF and FEA courses. I believe i can make the design and thr simulation in an optimal condition in minimum time with high quality. Please send me a message to discuss more about the project.
£33 GBP em 10 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
I have read and understood the requirement of your project. I have a Master's Degree in Mechanical Engineering with 3 years of experience in Automotive industry. During the 1st part of the project i can design a heat exchanger for you. Also would develop the 1D GT-Power Model to evaluate the correctness of the model (Validation - effectiveness, temperatures & pressures at boundaries etc). Please feel free to communicate.
£50 GBP em 40 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
Hello! I have designed Spiral Heat exchangers and Shell/Tube Heat Exchangers as per TEMA regulations. I can show you my work in a private chat. Anyway, my niche are in Heat Transfer equipments and Unit Operations. Kind Regards Tushar Rai
£32 GBP em 35 dias
0,0 (0 avaliações)
2,2
2,2
Avatar do Usuário
Hello there, I am a mechanical engineering graduate student who studies on thermal design. I built a MATLAB script to size the heat exchanger and calculate properties of air and refrigerant fluid during my undergraduate, also I designed different types of heat exchanger including plate heat exchangers also I am experienced about CFD programs. Therefore, I believe I can help you in this project. Please contact me for further details. Regards, Onurcan
£20 GBP em 15 dias
0,0 (0 avaliações)
0,0
0,0

Sobre o cliente

Bandeira do(a) UNITED KINGDOM
Leeds, United Kingdom
5,0
6
Método de pagamento verificado
Membro desde jul. 8, 2020

Verificação do Cliente

Obrigado! Te enviamos um link por e-mail para que você possa reivindicar seu crédito gratuito.
Algo deu errado ao enviar seu e-mail. Por favor, tente novamente.
Usuários Registrados Total de Trabalhos Publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Carregando pré-visualização
Permissão concedida para Geolocalização.
Sua sessão expirou e você foi desconectado. Por favor, faça login novamente.