Find Jobs
Hire Freelancers

Bluetooth Control to Turn on Vacuum and Shut Off Valve

$30-250 USD

Concluído
Publicado há mais de 7 anos

$30-250 USD

Pago na entrega
I have a device that uses 120v with one plugin. I need to be able to turn on and off the device remotely using Bluetooth or another method. One button will turn on vacuum and open solenoid valve at same time. Turning off will turn off power to vacuum and solenoid valve. Second button will open a different solenoid valve. Off will remove power from solenoid valve. The product needs to be battery powered.
ID do Projeto: 11138792

Sobre o projeto

21 propostas
Projeto remoto
Ativo há 8 anos

Quer ganhar algum dinheiro?

Benefícios de ofertar no Freelancer

Defina seu orçamento e seu prazo
Seja pago pelo seu trabalho
Descreva sua proposta
É grátis para se inscrever e fazer ofertas em trabalhos
Concedido a:
Avatar do Usuário
$155 USD em 7 dias
5,0 (18 avaliações)
4,6
4,6
21 freelancers estão ofertando em média $146 USD for esse trabalho
Avatar do Usuário
Dear sir I have more than 9 years experience please check my profile also please message me so that we can discuss
$222 USD em 5 dias
4,9 (284 avaliações)
7,6
7,6
Avatar do Usuário
A proposal has not yet been provided
$150 USD em 3 dias
4,8 (265 avaliações)
7,3
7,3
Avatar do Usuário
Hello dear I have worked on this type of projects and can make your project. i will make your project practically on breadboard and will provide circuit, code, PCB design. I can also develop android app for your project, so you will be able to control the valves from remote as well as from the android cell phone. I will design your product based on extremely low cost components that will be beneficial for you if you are going to manufacture the product. If you wish we can discuss in chat.
$220 USD em 7 dias
4,8 (68 avaliações)
7,1
7,1
Avatar do Usuário
Hey it is interesting project and i have completed similar projects. I will keep it simple and reliable. I will design the system but I will not manufacture the prototype , you have to manufacture the prototype, it is really hard to send prototypes via post couriers or DHL etc. I am bidding low and it is like 80% sale on my skills this is due to i am a newbie to this site. But i am an expert engineer. I am flexible to help you out in developing integrating, verification and validation of your product. I will be pleased to listen from you on this. Cheers !
$80 USD em 15 dias
4,8 (60 avaliações)
7,1
7,1
Avatar do Usuário
hi i am an electrical engineer. i have vast experience related to micro controller and its programming. i have done many embedded system projects. i have hardware experience regarding Arduino and bluetooth. let me know if you are interested. we can discuss further on chat.
$250 USD em 3 dias
4,9 (35 avaliações)
6,5
6,5
Avatar do Usuário
Please hire me. I have 4 years experience with schematic and pcb design as I am an electronics design engineer. Fluent in Mentor Expedition, Cadence Allegro, Mentor PADS, Altium Designer pcb layout tools. Experience in creating footprints library, pcb layout, constraint editing, gerber generation. Please send me a message to talk more about your project. Have a great day!
$150 USD em 7 dias
5,0 (22 avaliações)
6,2
6,2
Avatar do Usuário
Hello, I am Anthony. I am working FULL TIME as freelancer. I have double degrees in Mechatronics and Applied Science fields. I have very good feedbacks on freelancer.com . Please check the link at the end and review my feedbacks. So you can get an idea of my work. I have the capability to guide you until the manufacturing stage. I have many contacts in China and can help you to setup there if you are gonna mass produce your product. https://www.freelancer.com/u/Anthony989.html Thank you Anthony
$111 USD em 3 dias
4,8 (67 avaliações)
6,6
6,6
Avatar do Usuário
i am an electronic engineer with more than 10 years of experience. i have worked on several similar projects. i will prefer using rf as it is more reliable. i can ship u a prototype with casing. if you only require design then i can reduce the cost. please contact me to discuss details.
$250 USD em 7 dias
5,0 (17 avaliações)
5,7
5,7
Avatar do Usuário
Hello man, I'm Engineer Mechatronics, I have experience and knowledge working with microcontroller in projects, I can to develop the simple app with app inventor and design the schematic electronic, you can to use one small microcontroller or if you want one small arduino (nano). I'm to Order Regards Ing. Jose Correia Venezuela
$150 USD em 10 dias
5,0 (45 avaliações)
5,7
5,7
Avatar do Usuário
Hello I have got your job posting “Bluetooth control to turn on vacuum and shut off valve” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the embedded systems(Arduino ,ARM processors ,PIC microcontrollers,All types of sensors and actuators). i have done tons of similar projects So, I think you’ll find, I have the skills you’re looking for. For more on my skills and successfully finished projects, please have a look on my Profile and Portfolio. I have all the components available here with me so i will develop a working prototype according to your specifications and then send you the code and schematics so things will work for sure. I am always available on Email and Skype. Please have a voice or video chat if necessary. I will be available more than 60 hours per week and able to start your project as soon as possible according to you. Thank you for your consideration, Best Regards, Haseeb Shafqat
$111 USD em 7 dias
4,8 (59 avaliações)
5,9
5,9
Avatar do Usuário
Hi, I'm an electronic engineer with more than 4 years of experience in embedded system developing. I have a plan like this. I can create an Arduino device with blutooth support and according to the BT command, Arduino will operate an relay. This relay will turn on and off your 120V device. For controlling part for BT, We may need some kind of Desktop or Mobile app, which either of I can build. I have good experience in Android application and desktop application development too. So I'm confident on completing this project successfully. I would like to know more information on the project. Looking forward to hear from you. Thank you Anusha
$155 USD em 10 dias
5,0 (35 avaliações)
5,7
5,7
Avatar do Usuário
Details Dear Sir, Please find my approach below for your project. Please grant me this project if you like my solution. My previous projects are on my portfolio. 1. Using two arduinos- one of them will be a master and other will be a slave. 2. Master will have two thumb sized buttons which can be controlled by patient. 3. Using two HC-05 - these are used to establish Bluetooth link between the two arduinos. 4. A high quality optoisolated relay will be used to control the power to vacuum and solenoid. 5. A normally closed solenoid valve will be used which will open on power a on and close at power OFF. Thank you
$30 USD em 7 dias
5,0 (14 avaliações)
4,8
4,8
Avatar do Usuário
I have done several projects based on Bluetooth, wireless control and Home Automation. I can do your project easily. Let me know if you are interested.
$130 USD em 7 dias
5,0 (1 avaliação)
3,2
3,2
Avatar do Usuário
A proposal has not yet been provided
$130 USD em 2 dias
5,0 (5 avaliações)
2,8
2,8
Avatar do Usuário
I have been playing with AVR microcontroller for more than 2 years and longer with electronics as they are my hobbies. At the moment Freelancer is not my main job so I can bid as low price as possible. My intention is to share my hobby and expanding knowledge. Hope that can be working with you.
$30 USD em 3 dias
4,9 (5 avaliações)
2,6
2,6
Avatar do Usuário
Deliver fast as possible and I will show to Working Demo for this project
$120 USD em 5 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
consider this project done. have worked on something similar in the past for medical applications. let me know if you are interested. this can even be integrated with the smart phone. let me know if u r interested.
$222 USD em 10 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
Hello, Hosam is my name. I worked on a lot of embedded system projects on real. I understood your project requirements and i can implement for you even using bluetooth and your phone or using NRF240L module for larger distance. i am very good at Assembly, C, C++ & Python programming language & OOB. I worked on a lot of microprocessors/microcontroller like PIC, AVR, ARM CortexM4, Arduino uno, Arduino nano, 8085, 8086, MIPS and real time operating system. also i am PCB designer on proteus software. don't hesitate to contact me for more details. i promise you will be happy and satisfied. best regards
$30 USD em 7 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
I've worked and designer more than 30 products that activated actuators through Bluetooth (both 2.0 and 4.0) in critical situations.
$200 USD em 10 dias
0,0 (0 avaliações)
0,0
0,0

Sobre o cliente

Bandeira do(a) UNITED STATES
Thiensville, United States
4,9
142
Método de pagamento verificado
Membro desde ago. 11, 2010

Verificação do Cliente

Obrigado! Te enviamos um link por e-mail para que você possa reivindicar seu crédito gratuito.
Algo deu errado ao enviar seu e-mail. Por favor, tente novamente.
Usuários Registrados Total de Trabalhos Publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Carregando pré-visualização
Permissão concedida para Geolocalização.
Sua sessão expirou e você foi desconectado. Por favor, faça login novamente.