Find Jobs
Hire Freelancers

Arduino ESP32 coding

$30-250 USD

Em Andamento
Publicado há aproximadamente 5 anos

$30-250 USD

Pago na entrega
I have a project that I have been working on and need a little assistance. I have an ESP32 board that I am working with as well as other components. Max6675 Mosfet TB6612 motor driver micro switch JGY-371 12V DC motor with encoder MT3608 DC - DC boost I have some of the code working but need some help putting it all together.
ID do Projeto: 18531238

Sobre o projeto

22 propostas
Projeto remoto
Ativo há 5 anos

Quer ganhar algum dinheiro?

Benefícios de ofertar no Freelancer

Defina seu orçamento e seu prazo
Seja pago pelo seu trabalho
Descreva sua proposta
É grátis para se inscrever e fazer ofertas em trabalhos
22 freelancers estão ofertando em média $154 USD for esse trabalho
Avatar do Usuário
Hello my name is Maria, I would like to work in this project, I’m an engineer with plenty of experience working with Arduino, Electrical Engineering, Electronics, Microcontroller, PCB Layout , I have made many Arduino projects, so I am sure I can do a good work for you. Good communication with my clients it is a top priority for me. If you have any doubt or want to see more of my work I’ll be here. Contact me for more info.
$250 USD em 3 dias
4,9 (17 avaliações)
6,5
6,5
Avatar do Usuário
Hello, I am Anthony from Sri lanka. We are a hardware designing & prototyping company. Why you should hire me ? - I have seven years of experience in the field and have developed many systems. - I have state of the art testing lab and PCB fabrication workshop. - We have DLP & FDM 3D printing, - I have many contacts in China. I can help you with mass producing this. Please contact me if you are interested. Thank you Anthony
$155 USD em 3 dias
4,8 (64 avaliações)
6,5
6,5
Avatar do Usuário
Hi, Let me help you Integrate your program. I have became firmware programmer since 2012 and familiar with ESP32 over Arduino IDE. I have used it several times. let me help you Integrate your code. let's discuss the details over chat. Best Regards, Rijal
$166 USD em 5 dias
4,9 (72 avaliações)
6,2
6,2
Avatar do Usuário
hi there i am an electrical engineer with vast experience related to esp32 and its programming in arduino environment. i can help you out to finish your project successfully. give me more details of your project and i will be more than happy to do this project for you.
$300 USD em 5 dias
4,8 (36 avaliações)
6,4
6,4
Avatar do Usuário
Hi There I have checked your project description and understand everything. I am very confident that i can do this project perfectly. I am expert in arduino please check my profile. Thanks
$111 USD em 3 dias
4,9 (75 avaliações)
5,5
5,5
Avatar do Usuário
Dear sir, Greetings!! I have over two year experience programming under arduino environment and currently working on various ESP32 based projects using TTGO modules with sd card, oled and lora integrated. Please share a little more details about project regarding what exactly you want to be the final application to be. Thank You!!
$220 USD em 7 dias
4,9 (15 avaliações)
5,0
5,0
Avatar do Usuário
I am an electrical engineer and worked on projects related to Arduino. I can help in this project. let me know if you want assistance in this project.
$166 USD em 7 dias
4,6 (20 avaliações)
4,8
4,8
Avatar do Usuário
Hi there.I offer you the services for Arduino designs, I complete the jobs in ESP32 Arduino. I am new on freelancer site, but I am designer expert with 10+ years of experience in Circuit designs, PCB designs, Zigbee/bluetooth,Wifi software development. You can check our designs in our portfolio. If you want, I will share more designs I completed so far through interview. So I like to discuss the job with you. Lets talk about your project through interview. Thank you.
$150 USD em 3 dias
4,3 (8 avaliações)
4,8
4,8
Avatar do Usuário
I am an Electrical Engineer having specialization in Electronics Control and Power, teaching at well known University in Pakistan. I have done my BS degree in Electrical Engineering with specialization in Power. Also i hire many persons in my Company for freelancing. They know many skills like Graphic designer, Logo Designer, Video Editing and Data entry. I have taught the followings courses, and also done many projects related to these subjects as well as related to consumer electronics products. 1. Control System Design & Modelling (Continuous, Discrete, Linear, Non-Linear, Optimal, Fuzzy Logic + Matlab & Simulink) 2. Digital System/Logic Design (Verilog, VHDL, Logisim) 3. Digital Signal Processing (MATLAB) 4. Micro-controllers (8051, Arduino, PIC) 5. Power Electronics (PSIM, MATLAB, PSpice) 6. Control of Electric Machine Drives 7. Circuit Analysis and Designe etc 8. PCB Design (Proteous + Ultiboard + Altium Designer) I assure you, if you assign your project to me, you surely gonna work with me in future. Note: I also provide the services in Mechanical Engineering and Computer Science related projects.
$150 USD em 3 dias
4,6 (12 avaliações)
3,6
3,6
Avatar do Usuário
Hi. I work as Hardware Engineer in a company that develop IOT projects. My responsibilities in the enterprise are: Design the electronic circuits (analog, digital, control and power); Develop the code for the MCU and embedded systems using software like MPLAB X IDE, Arduino IDE and Python; Test and simulate the schematic of the circuit through simulation software (Proteus and MATLAB/Simulink); Calculate the electrical parameters of the components to implement the circuits on a PCB; Design the PCB of the electronic circuits using software like Altium and Eagle; Redesign schematics and PCB layout for old prototype of circuits with the idea of update the embedded system with new technologies. I have made projects relationated with the home automation using the internet of things using Wi-Fi and Bluetooth modules (ESP8266, ESP32 and Rapsberry Pi) and TCP/IP protocol mostly, but also using UART, I2C, SPI and 1 WIRE to communicate MCU with sensor, mostly current sensors and humidity and temperature sensor (DHT22). Also, the implementation of PIC12F, PIC16F, PIC18F, PIC24F and PIC32F, to make create sub circuits to measure data from sensors, creating small devices inside if the embedded system, like the design of a digital wattmeter with I2C communication with the master (ESP12F) using the PIC16F877A, Current and Voltage transformers. All of these projects are posted on my profile. Hope that I have fulfilled your expectations and can be a good candidate to work for your project.
$155 USD em 3 dias
5,0 (5 avaliações)
3,4
3,4
Avatar do Usuário
Hi, Think i might be able to help with your project, but would need to have a look at the existing code and circuit and a some details about what you need fixed or added to send you an actual bid, Thanks.
$200 USD em 3 dias
5,0 (1 avaliação)
3,0
3,0
Avatar do Usuário
Hey there, I can do your project and I have extensive experience in Arduino ESP32. Message me so we can discuss more. Thank you.
$111 USD em 3 dias
5,0 (2 avaliações)
2,2
2,2
Avatar do Usuário
I'm very experienced with esp32 and have decent English. I can easily help you whenever you want. I also don't want much money.
$40 USD em 3 dias
5,0 (4 avaliações)
2,2
2,2
Avatar do Usuário
I've worked in several Arduino projects during my electrical engineer school. I think I could help you with this project
$133 USD em 4 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
i am four year experienced embedded developer, i have done many projects like iot projects, i am experienced in microcontrollers like pic,arm,arduino, atmel,atmega328p etc and c programming. used tools like orcad capture ,mp lab, avr, arduino, keil, etc. communications lilke uart, i2c,spi, wifi,bluetooth, rf etc. moudules like esp8266, lcd,glcd,gsm,eeprom,various sensors etc.
$155 USD em 3 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
I have rich experience of arduino and its modules like DTMF, Bluetooth (HC series), ESP, etc. I have worked with drivers and sensors. I have right skills and experience to complete the work on time. I have published papers on robotics involving arduino and sensors.
$111 USD em 4 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
Hello! I am an electrical engineer and i already worked Max6675 thermocouple amplififer module as you can see in my video i am using max6675 thermocouple for temperature measurement with ESP32, in addition i also worked with hall effect encoder motors. So, I would feel great to help you in coding.
$105 USD em 4 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
Hello, I have 3 years of experience in internet of things. I am able to control appliances via internet using cloud or Bluetooth. Also able to work on raspberry Pi, Arduino, esp and other hardware programming. kindly share more details to proceed further. thanks
$200 USD em 5 dias
0,0 (0 avaliações)
0,0
0,0

Sobre o cliente

Bandeira do(a) UNITED STATES
Buffalo, United States
0,0
0
Método de pagamento verificado
Membro desde fev. 21, 2018

Verificação do Cliente

Outros trabalhos deste cliente

Heating pad
$30-250 USD
Obrigado! Te enviamos um link por e-mail para que você possa reivindicar seu crédito gratuito.
Algo deu errado ao enviar seu e-mail. Por favor, tente novamente.
Usuários Registrados Total de Trabalhos Publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Carregando pré-visualização
Permissão concedida para Geolocalização.
Sua sessão expirou e você foi desconectado. Por favor, faça login novamente.