Find Jobs
Hire Freelancers

Design a control panel

$750-1500 AUD

Fechado
Publicado há quase 8 anos

$750-1500 AUD

Pago na entrega
Modernise a control panel that currently operates on relay logic. Contact me for more info.
ID do Projeto: 10870873

Sobre o projeto

36 propostas
Projeto remoto
Ativo há 8 anos

Quer ganhar algum dinheiro?

Benefícios de ofertar no Freelancer

Defina seu orçamento e seu prazo
Seja pago pelo seu trabalho
Descreva sua proposta
É grátis para se inscrever e fazer ofertas em trabalhos
36 freelancers estão ofertando em média $1.029 AUD for esse trabalho
Avatar do Usuário
I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department at FAST National University Pakistan. I am also persuing my MS degree in Electrical Engineering with specialization in CONTROL. I have taught the followings courses, and also done many projects related to these subjects as well as related to consumer electronics products. 1. Control System Design & Modelling (Continuous, Discrete, Linear, Non-Linear, Optimal, Fuzzy Logic + Matlab & Simulink) 2. Digital System/Logic Design (Verilog, VHDL, Logisim) 3. Micro-controllers (8051, Arduino, PIC) 4. Power Electronics (PSIM, MATLAB, PSpice) 5. Control of Electric Machine Drives 6. Circuit Analysis and Designe etc 7. PCB Design (Proteous + Ultiboard + Altium Designer) I assure you, if you assign your project to me, you surely gonna work with me in future. Note: I also provide the solution of mechanical engineering related projects.
$1.000 AUD em 10 dias
4,8 (242 avaliações)
7,2
7,2
Avatar do Usuário
Hi, I am a post graduate power electronics engineer and having very good industrial experience of 8+ years in R&D and project development. I am excellent high frequency transformers design, circuits design, Regulated power supplies design with universal input to DC output, Filters design for harmonic analysis and Power factor correction, SMPS, LED drivers, DC-DC, AC-DC converters design, PFC interleaved boost converter, Battery management system, Battery chargers, UPS design, sine wave Inverters, solar grid tie inverters, Solar battery chargers and street light systems design from few watts to KW range using Buck, Boost, and Buck –boost, Interleaved boost/buck, Fly back Push Pull and H-bridge inverters. I have work experience to design from few watts to KW range meeting all compliances like EMI/EMC and safety standards UL etc.
$1.250 AUD em 12 dias
4,8 (56 avaliações)
6,7
6,7
Avatar do Usuário
Hello. I'm an electrical engineer / PCB designer. You may check my qualification in the profile portfolio. Your project interested for me can you give more details. We can discuss any details over chat. Will do my best, Viktor
$850 AUD em 15 dias
4,9 (49 avaliações)
6,2
6,2
Avatar do Usuário
I have over 35 years experience as an electronic design engineer, please see my profile for more details The current price and timescales are only place holders to allow me to communicate with you If you think I can help then please send me further details Best Regards Dave Lelievre
$1.250 AUD em 20 dias
4,9 (15 avaliações)
5,7
5,7
Avatar do Usuário
Hello Dear, We are a team of experts with a combined experience of more than 50 years in the field of embedded system, programming, electronics and prototype development. Our experts have experience with 8-bit, 16-bit and 32-bit architectures developing ultra-low power designs with complex functions. I have checked your requirements in detail. However further detail about the panel is definitely required. We have moderized/digitized many obsolete panels and machines over the years. I assure you the best solution and upgrade for the panel. I am online and available for discussion. Regards Ch
$1.111 AUD em 30 dias
4,5 (35 avaliações)
5,7
5,7
Avatar do Usuário
A proposal has not yet been provided
$834 AUD em 20 dias
5,0 (14 avaliações)
4,6
4,6
Avatar do Usuário
Hello, Deep Kapadia here from India. Professionally i am Embedded System Developer (working in the domain of Industrial Automation). I have worked with STM32F4(ARM), TIVA C from Texas Instruments(ARM), 8051, ATmega8-16-32, Arduino, etc. Microcontrollers. I have experience with RTC, GSM, RFID, 7-seg LED, LCD, WiFi, Bluetooth, Various Motors(DC, Servo, Stepper), RF, Various Sensors(Flex , IR, Ultrasonic, Temp, Humidity). Have experience in PCB designing using EAGLE CAD, Proteus, DesignSpark PCB. Some of my works: ->Industrial Automation related works ->Gesture Controlled Humanoid Hand ->Water Vending Machine ->GSM based Smart Security System ->Smartphone based IR Remote ->Smart Notice Board ->Self-Balancing Vehicle ->Fire Extinguishing Vehicle ->Line Following Vehicle ****** I am working in the domain of Industrial Automation. So i can help you for your work. ****** Thank you, Deep Kapadia
$750 AUD em 15 dias
4,8 (12 avaliações)
4,2
4,2
Avatar do Usuário
Hi. Interesting project. I congratulate you on your initiative. I would like to know more details of the control panel you want to Modernise to suggest something. I recently completed a modernization of a control panel replacing 20 relays, switches and several buttons for simply a S7-200 PLC and a screen. In fact the size and complexity of wiring is greatly decreased. If you have any questions please do not hesitate to contact me. Thanks regards Pardo Darwin
$1.250 AUD em 20 dias
5,0 (8 avaliações)
4,0
4,0
Avatar do Usuário
A proposal has not yet been provided
$1.111 AUD em 7 dias
4,7 (4 avaliações)
4,0
4,0
Avatar do Usuário
Hi, I have experience for 15+ years in electronics/embedded development. I have successfully replaced legacy control panels and electric circuit control boxes in industrial machinery for several times. Replacing old relay-based, electric/electronic timer modules, buttons, sinalizers, etc. with custom microcontroller-based electronics. Off-the-shelf and/or open hardware/software solutions used whenever possible with preference for Arduino based hardware. Regarding Arduino, I have several years of advanced AVR/arduino development, including library development from scratch. Practically all Arduino AVR boards used, like: 2009, 2010, UNO, MEGA, NANO, MICRO, MINI, etc. Several shields used like Ethernet (W5100, ENC28J60, etc.) with various IP protocols implementation, various graphical TFTs with and without touchscreen and various BUS types (parallel, SPI, I2C, etc.), all kinds of sensors and buses, serial and parallel memories, etc. If you are interested in my bid, please let me know some more details about your project and I'll be able to answer you back telling if I'm up to the task or not. Feel free to contact me. Regards, Carlos.
$950 AUD em 20 dias
5,0 (3 avaliações)
3,9
3,9
Avatar do Usuário
No problem Sir! More info please... Br, RB
$1.250 AUD em 20 dias
4,8 (6 avaliações)
3,5
3,5
Avatar do Usuário
i am Assistant Technical manager of Sublime Enterprise . i have 5 year experience to work on hardware design , software design e.t.c , i also design lots of industrial product . Design Pakistan's 1st RFID debit card system for amusement Parks. i can complete your project as you want..
$750 AUD em 20 dias
5,0 (3 avaliações)
3,0
3,0
Avatar do Usuário
Once details are submitted I will work with you to design the best solution for your application. This type of job is my bread and butter here in the UK on a daily basis. If the project is in anyway not to your standard or liking then of course no payment on your part will be made.
$1.250 AUD em 20 dias
5,0 (1 avaliação)
2,3
2,3
Avatar do Usuário
A proposal has not yet been provided
$750 AUD em 7 dias
5,0 (1 avaliação)
1,5
1,5
Avatar do Usuário
Hello. I am an Electronics Engineer how have an experience with classic control and wide experience with SSR . I do not actually know what improvements you want to do. so the price and days needed are not accurate. Contact for more details.
$750 AUD em 7 dias
5,0 (1 avaliação)
1,4
1,4
Avatar do Usuário
Hi I made a mini PLC using PIC16F877A Microcontroller.... Its a 16 Channel I/O Device.... I used Optocoplers and Relays to carry out the task and the system works on standard Ladder Logic software.... Please see the Project on my Profile..... Regarding your Project... You can discuss it with me since their is no information on what type of modernization you need....... Feel Free to drop a message... I am not annoying I just talk on the point no extra messages.... We will Decide about the project budged when every thing is cleared....... ABOUT ME: I am a professional PCB and Circuit Designer. I designed many circuits and their PCB's. I also do programming of microcontrollers and their interfacing with different electronics components. I have experience in Pic,8051, Arduino, Atmel etc. I did many Projects using Arduino(Uno,Mega,mini etc). I am Running a Website Under the name www . microcontroller-project . com You can see my work on it. Their are lot of Projects on it using different microcontrollers. It also contains projects in which Arduino is used to control appliances. Feel Free to Contact me. THANKS
$750 AUD em 10 dias
5,0 (2 avaliações)
0,4
0,4
Avatar do Usuário
I am enthusiastic about PCB layout design and embedded system design with experience in designing PCBs in EAGLE and embedded systems for various projects of my own. I am a qualified electronic engineer. I have experience with PIC microcontrollers as well as the Arduino platform. I can offer the very best of my design abilities to complete the task at hand.
$1.111 AUD em 20 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
Good day! I will make this project in one week. I have good experince in design PLC programs, HMI interfaces and relay logic. For more information you can write me a letter for my email.
$750 AUD em 20 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
Dear employer, The way I think is need to be modernised, is to draw PCB board with microcontroller and maybe LCD display or other peripheral output device you want. I can do this job for you (PCB layout, component selection, programing microcontroller, simulation in Proteus). Best regards
$750 AUD em 15 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
my experience in panel design and my previous work in the field of power and plc panels and my will to prove my self in the freelancers society
$888 AUD em 20 dias
0,0 (0 avaliações)
0,0
0,0

Sobre o cliente

Bandeira do(a) AUSTRALIA
Picton, Australia
5,0
1
Método de pagamento verificado
Membro desde out. 15, 2013

Verificação do Cliente

Obrigado! Te enviamos um link por e-mail para que você possa reivindicar seu crédito gratuito.
Algo deu errado ao enviar seu e-mail. Por favor, tente novamente.
Usuários Registrados Total de Trabalhos Publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Carregando pré-visualização
Permissão concedida para Geolocalização.
Sua sessão expirou e você foi desconectado. Por favor, faça login novamente.