Find Jobs
Hire Freelancers

Create Electrical Drawing and Program xlogic PLC to control DC motor

$30-250 USD

Cancelado
Publicado há mais de 10 anos

$30-250 USD

Pago na entrega
Detail described in the attachments - but here is a summary. I have a test device that includes a 4A 24V DC motor that drives a small pump. The pump can only operate for short periods, but I need to leave the device unattended for a few days at a time. The role of the PLC is to control when the pump starts based upon digital and analog inputs, and limit the time that the motor operates to a few minutes. It will also have the option to switch it off if a temperature sensor detects that it is getting too hot, or a pressure sensor indicates a line blockage. Electrical Drawing I need to have a proper electrical schematic drawn up showing all the switches, wires, and connections via terminal blocks where they are required. This has to be suitable to give to an electrician to wire up, and an engineer to check for safe wiring. I have made a rough sketch, showing function, but not all connections, and need someone who can do electrical drawings to show all the required components and complete circuit.
ID do Projeto: 5182419

Sobre o projeto

8 propostas
Projeto remoto
Ativo há 10 anos

Quer ganhar algum dinheiro?

Benefícios de ofertar no Freelancer

Defina seu orçamento e seu prazo
Seja pago pelo seu trabalho
Descreva sua proposta
É grátis para se inscrever e fazer ofertas em trabalhos
8 freelancers estão ofertando em média $219 USD for esse trabalho
Avatar do Usuário
Hello, I'm a TA at faculty of engineering , cairo university .I'm working as a part time engineer at an automation company where i deal with different types of PLC and SCADA systems. I can work on xlogicx and finish the project in 3 days. thanks in advance
$111 USD em 3 dias
4,9 (10 avaliações)
4,9
4,9
Avatar do Usuário
I have send all the description to my friend who is expert in PLC,SCADA instrumentations programming,design,schematics and all stuff. He'll reply me by tomorrow evening with actual budget & doubts if any. Since he's having 5+ years experience in the industry, you don't need to worry about the quality. So give me a time upto tomorrow. Thanks & Regards Sachit Jani
$277 USD em 3 dias
5,0 (1 avaliação)
2,8
2,8
Avatar do Usuário
Hello, I am a Electrical/Mechanical Designer with over 20 years of experience. I also have a Bachelors of Science in Mechanical Engineering. I am fully versed and have over 10 years experience with Solidworks and Autodesk Inventor both of which I have full current copies of, and over 20 years of experience with Autocad in both 2D and 3D environments. I have 10 plus years experience in manufacturing and supervising the manufacturing of various items. I am very familiar with drawing items up for manufacturing. I am located in the USA and am always available via Skype, email or phone to talk to you about this. I have done many projects similiar to this and would be happy to help you out.I look forward to working with you on this project if selected. Please let me know if your interested in my services. Sincerely, Mike
$200 USD em 7 dias
4,2 (3 avaliações)
2,8
2,8
Avatar do Usuário
I have experience with numerous types of PLC such as Rockwell Automation, Mitsubishi and Omron PLC. In addition, I have worked in the manufacturing plant producing I/O board and power supply of PLC products.
$277 USD em 5 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
I'm specialized at control , embedded systems (Microcontrollers),electronics , power electronics and Automation( PLC ,Scada and DCS)
$155 USD em 3 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
I will admit that I've never seen nor heard of the xLogix controllers until reading this job posting, but it seems up to the task. I have worked with a variety of PLC/PAC controllers, and I'm sure that this one will be easy enough to get along with. Most of my PLC experience comes from the power generation and substation automation world, and running a pump is familiar territory. The notes that you have put together I believe give a good description of what you need to accomplish. Have you already purchased the parts and pieces? If you have, I'll need the particular models of all of the devices involved so that I can verify the terminal numbers, dimensions, etc. My only real concern is the temperature sensing...as far as I know, the LM45 is a PCB-level temperature sensing device. Seems to me that designing a custom printed circuit board to drive the LM45 is outside the scope of what you are trying to accomplish. To that effect, my proposal is based on the assumption that the temperature sensing will be done using an "industry standard" voltage output device, and leave the details of that up to you. I'm assuming that you want to put all of these devices inside an enclosure, so if you can provide the dimensions of the cabinet you have, I can add a physical layout drawing. If you havent purchased the parts and pieces yet, I can recommend easy-to-find ones for you, and include these in the documentation.
$277 USD em 7 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
I have 6 years in designing DCS/SCADA and PLC systems. So with this project, I will prepare drawings as below: - Schematic drawing - Termination drawing to show detail how to do wiring - Ladder diagram for PLC - Application software - Input/Output list (memory address) - Testing document and user guide Note that, the drawings will be prepared by autocad and converted to pdf file. We will discuss specifications of the products in this project later.
$200 USD em 5 dias
0,0 (0 avaliações)
0,0
0,0

Sobre o cliente

Bandeira do(a) PAKISTAN
ISLAMABAD, Pakistan
4,4
1
Método de pagamento verificado
Membro desde out. 10, 2013

Verificação do Cliente

Obrigado! Te enviamos um link por e-mail para que você possa reivindicar seu crédito gratuito.
Algo deu errado ao enviar seu e-mail. Por favor, tente novamente.
Usuários Registrados Total de Trabalhos Publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Carregando pré-visualização
Permissão concedida para Geolocalização.
Sua sessão expirou e você foi desconectado. Por favor, faça login novamente.