Bluetooth Power Relay - repost 2
$750-1500 USD
Pago na entrega
Overview:
A Bluetooth relay with two 120V 60hz power outlets, Outlet #1 and Outlet #2, can be turned On / Off remotely with a Bluetooth iOS App. The two outlets will have two independent relays, Relay #1 and Relay #2, that can switch the power on and off to turn power on and off to Outlet #1 and Outlet #2.
The Bluetooth remote will transmit a Bluetooth signal to a Bluetooth receiver located on a relay board. The Bluetooth iOS transmitter will contain three buttons. On reception of one of the three Bluetooth button signals, the relay board will then send the corresponding signal to a micro controller that will perform relay switching logic. If Button #1 is pressed on the Bluetooth iOS app, then it will turn off Relay #1 for 5 seconds and then turn Power on to Relay #1. If Button #2 is pressed on the Bluetooth iOS app, then it will turn off Relay #2 for 5 seconds and then turn power on Relay #2. If Button #3 is pressed on the Bluetooth iOS app, then the logic will turn both relays off. Then after 10 seconds it will turn Relay #1 on. Finally, after 40 seconds, the logic will turn Relay #2 on.
Relay Process For Button Press #1:
1) User presses button 1 on the Bluetooth transmitter.
2) The Bluetooth receiver receives the signal.
3) The Bluetooth receiver sends a signal to the micro controller.
4) The microcontroller then signals to turn off Relay #1 for 5 seconds
5) The microcontroller then signals to turn on Relay #1
Relay Process For Button Press #2:
1) User presses button #2 on the Bluetooth transmitter.
2) The Bluetooth receiver receives the signal.
3) The Bluetooth receiver sends a signal to the micro controller.
4) The microcontroller then signals to turn off Relay #2 for 5 seconds
5) The microcontroller then signals to turn on Relay #2
Relay Process For Button Press #3:
1) User presses Button #3 on the Bluetooth transmitter.
2) The Bluetooth receiver receives the signal.
3) The Bluetooth receiver sends a signal to the micro controller.
4) The microcontroller then signals to turn off both relays.
5) After 10 seconds, the micro controller turns on Relay #1.
6) After 40 seconds, the micro controller turns on Relay #2.
Requirements:
The Bluetooth relay shall plug into a 120V 60hz and provide power to Outlet #1 and Outlet #2
This Bluetooth relay shall also be a surge protector.
This Bluetooth relay shall rated to the US rating of safe power regulations to power 2 outlets: Outlet #1 and Outlet #2.
The Bluetooth relay shall be controlled with a Bluetooth transmitter with 3 buttons which map to 3 different relay operations as explained prior in this document.
Deliverables for the Project:
1) Electrical Schematic for the Bluetooth receiver, microcontroller, the Relays controlling two 120V 60hz outlets with US safety ratings.
2) Design of the PCB with the Electrical Schematic. This deliverable should be ready for a placement company to manufacture the product. The PCB Design should fit in the smallest form factor possible.
3) Part list that includes inexpensive parts for the manufacturing of the project. These parts should be readily available in high surplus from popular online electronic outlets such as digikey.
4) C code with the correct logic to handle all three button presses from the Bluetooth transceiver that will perform the required logic as discussed earlier in this specification.
Potential Parts of Interest in Initial Proto Type:
1) HC-05 Bluetooth Bluetooth Module:
[url removed, login to view]
2) Relay:
[url removed, login to view]
3) Atmega 328 (Compatible with the Ardruino Uno)
[url removed, login to view]
[url removed, login to view]
ID do Projeto: #5066350
Sobre o projeto
20 freelancers estão ofertando em média $1684 nesse trabalho
Dear Hiring Manager, I am a professional electrical engineer with the vast experience in bluetooth and wifi technologies. I have made several projects on these. I can surely complete this project. My rate is highe Mais
I can do this project using a PIC microcontroller but I would like to use already developed bluetooth module if its ok then let me know I shall submit my detalied proposal bassed on milestones. I have 12 years of de Mais
Dear Sir I have master degree from electronic and i work as professional circuit and PCB designer. I am offering you professional help on you'r project. I have a lot of experiance with bluetooth devices, and with mo Mais
I can do your job. Experience with the AVR. I'll deal with bluetooth, I have other modules available. iOS - will take some time to write an application.
Hi Brandon, My design is nearly ready, if you accept it to work by means of BLE ( Bluetooth Low Energy ), which comes in every smartphone sold in the last two years. Should you decide to work on generic Bluetooth p Mais
Al right, ready to show you work done on it. Want to deliver you. Can we call you on phone or Skype? Thanks Kashif