Desenho de Engenharia Jobs

I have a set of spur gears that must be modeled with production-ready precision in SolidWorks. You will create the complete 3D geometry and generate fully detailed 2D manufacturing drawings, all in line with standard engineering drafting conventions (ISO/ASME). I will supply the exact module or diametral pitch, tooth count, face width, and any other critical parameters as soon as the project starts; accuracy to those numbers is essential. Deliverables – each version must open cleanly and show no rebuild errors: • Native SolidWorks parts and, if needed, an assembly (.SLDPRT / .SLDASM) • Neutral 3D file (.STEP) • Drawing files in DWG and PDF, fully dimensioned and toleranced Acceptance will be based on: • Correct gear geometry per the provided module or D...

I need proposed drawings for a residential project. This includes: - Proposed new warehouse size and placement - Retaining wall design and placement Ideal skills and experience: - Expertise in residential architecture - Experience with retaining wall design - Proficiency in creating detailed and accurate architectural drawings

I have already modelled and drafted the tie-in system for three tower cranes and produced the accompanying shop drawings. What I now require is a seasoned structural engineer to give the study a thorough check, close any technical gaps, and issue the final documents I can submit to the client and the site team. Scope of the review The core of the assignment is to validate every structural aspect of the ties—confirming the load paths, verifying the adequacy of each tie-in point on the building, and checking that the material selections and grades match both code and manufacturer limits. My existing shop drawings, connection details, and preliminary notes will be at your disposal from day one. Deliverables • Signed and referenced load calculations (crane and building actions...

I need an electrical engineer to create electrical plans for city approval. I have a floor plan with equipment layout. Requirements: - Modify existing floor plan to integrate electrical requirements - Ensure compliance with city regulations - Provide detailed, accurate electrical plans Ideal Skills and Experience: - Proficient in electrical design and city code compliance - Experience with manufacturing machinery installation - Strong attention to detail and accuracy Need electrical engineer that can create drawings for the City of Moreno Valley to satisfy installation of manufacturing equipment.

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

I need a structural engineer to analyze the stability of a concrete gravity retaining wall. The analysis should focus on: - Sliding stability - Bearing capacity Ideal skills and experience: - Expertise in soil mechanics and retaining wall design - Experience with stability analysis of gravity walls - Proficiency in relevant engineering software Please provide relevant qualifications and previous work examples.

I have two non-commercial pergolas already installed and mounted on a newly built one-story steel rooftop deck. Each unit sits installed on four factory aluminum inserts that are through-bolted to the deck; the pergola posts are anchored to those inserts with single 10" bolts at the base. The city will only sign off once a licensed engineer confirms the assemblies can resist local wind pressures and possible up-drafts at roof level. I can supply a full package of blueprints, photos, and existing engineering specifications for both the deck and the current pergola installation. What I need from you: AN ACTIVE STATE OF IL LICENSE • Complete wind-load analysis in accordance with the applicable building code (IBC / ASCE 7) and current building codes. • Recommendations fo...

I need a structural calculation for a concrete retaining wall, which will support a new extension with a height of 1 meter. Key requirements: - Calculate load-bearing capacity - Ensure compliance with height specifications - Provide detailed design calculations Ideal skills and experience: - Civil or structural engineering background - Experience with concrete retaining walls - Knowledge of local building regulations and codes - Strong analytical and problem-solving skills Looking for accurate and professional work to ensure safety and stability of the new structure.

I have an ETABS and SAFE model of an industrial building and need to model it in STAAD Pro. I will provide you with architectural drawings, material specifications, and any initial data I have. Your job is to build the STAAD model, assign dead, live, wind, and other related loads realistically, perform a thorough structural analysis, and provide clear and traceable results. My expectations are: • A clean, layered .std model that reflects the geometry exactly as submitted. • Comprehensive load calculations and combinations set up in STAAD Pro • A concise PDF or Excel report that provides a summary of the reactions, member forces, deflections, and any important notes or warnings revealed by the solver. • All assumptions are stated so that I can check them against the...

Sac metal konusunda deneyimli, SolidWorks’ü akıcı biçimde kullanan bir makine mühendisiyle çalışmak istiyorum. Tasarlanacak ana ekipman paslanmaz çelikten konveyörler olacak; üretim hattımıza uyumlu, montaja hazır ve üretilebilir çizimler bekliyorum. İşin kapsamı • Konveyörün 3D modelinin SolidWorks’te hazırlanması • Sac metal katlama, bükme ve kaynak detaylarının doğru biçimde işlenmesi • Teknik resimler, parça listesi (BOM) ve montaj adımlarının oluşturulması • Gerekirse üretim hattı yerleşiminde temel yönlendirme yapılması Beklenen yetkinlikler • Paslanmaz çelik konstrüksiyon ve sac metal tasarım tecrübesi • SolidWorks sheet m...

I need an as-built engineered drawing of a DFO screen I've built, compliant with AER standards. Requirements: - Format: PDF - Must meet AER guidelines - Detailed as-built accuracy -Must have rate depicted in drawings. -Example drawing can be supplied. Ideal skills and experience: - Expertise in AER regulations - Proficient in creating as-built engineered drawings - Strong background in PDF format engineering drawings

Structural Engineer (Florida PE) – Engineer of Record for Large Industrial Steel Building Project Overview We are seeking an experienced Florida-licensed Structural Engineer (PE) or structural engineering firm to serve as the Engineer of Record for a large industrial steel building that will be fabricated overseas. The selected engineer will develop the complete structural design and sealed construction documents in accordance with the Florida Building Code and applicable standards. After completion of the initial structural design, the selected overseas steel manufacturer will review the design and may propose revisions to improve manufacturing efficiency, reduce cost, simplify fabrication, or substitute equivalent structural materials commonly used in international steel fabrica...

I need a complete fabrication design for a 24-foot Tata T19 Ultra that will be converted into a mobile maintenance workshop. I will supply the OEM chassis drawings and all critical dimensions; what I need from you is a set of build-ready plans that a fabricator can follow without guesswork. Scope • Body structure in STEEL, optimised for strength, weight balance and ease of manufacture. • Interior layout that fits the following must-haves: tool storage compartments, two sturdy workbenches and enough power-supply outlets to run multiple hand tools simultaneously. • Integration points and mounting details for a hydraulic lift, an air compressor and a welding machine, including safe load calculations, ventilation and service access. • External panels, doors, steps ...

I’m looking for a custom headlight mounting cradle for my 2011 Suzuki GS500 (standard/naked) motorcycle to mount a STEDI 7” LED headlight while retaining the original Suzuki headlight bucket, chrome retaining ring and OEM beam adjustment mechanism. Requirements: • OEM-style hidden cradle using the original GS500 bucket and chrome retaining ring. • Two-piece design consisting of a front cradle and rear carrier/clamp. • No visible fasteners or brackets from the front of the motorcycle. • Secure, precision fit suitable for CNC machining. • Hybrid material preferred: polished stainless steel front cradle and black anodised aluminium rear carrier (open to recommendations). • Final deliverables to include editable CAD files, STEP files and manufac...

I’m looking for a qualified mechanical engineer who can step in and complete a specific technical task that sits squarely in the engineering space. The work involves applying core mechanical-engineering principles—sizing components, running stress or thermal calculations, and translating the results into clear CAD models and production-ready drawings. Here’s what I need from you: • Review the existing concept notes I’ll share and confirm the assumptions. • Carry out all necessary calculations (strength, tolerance, materials). • Create or update 3D models and 2D drawings in a mainstream package such as SolidWorks or Inventor. • Deliver a concise engineering report that explains the methodology, formulae used, safety factors, and final rec...

Job Title: Mechanical Engineer – Deployable Solar Array & Folding EV Charger Structure (Kinematics, Sheet Metal, Fabrication) Project Overview: We are building a transportable, off-grid EV charging station with a deployable solar array. The Core Mechanism: • A central steel column that rotates from horizontal (transport) to vertical (deployed). • 6 solar panels that fold into a compact 3-sided box around the column for travel. • Upon deployment, the panels swing outward radially to form a flat solar canopy. Look up the attachment for detailed project description.

A temporary go-kart track already sits on an approved parking lot, yet the city has asked for a separate site-permit package before operations can continue. I need a Texas-licensed Civil Engineer to turn our material into a stamped plan set that answers every municipal comment. What I will hand over the moment we start: • My original draft civil plan. • The city’s written feedback covering safety measures, regulatory compliance, and design improvements. • Photos and sketches of the existing installation, including the barriers and railings, emergency exits, and safety signage that are already on-site. Your task is to study that information, verify the applicable local codes, and prepare a full permit-ready site plan—cover sheet, existing/proposed layout, ...

My hand-built spiral staircase is already fully installed, and before the county inspector comes through I need a licensed structural engineer to review it and issue a wet-stamped letter or set of drawings confirming that the build meets code. I do not have original blueprints or calculations, so you would need to work from on-site measurements, photographs, and any other information you require from me or the fabricator. Ideally you will: • Visit (or guide me through gathering) the critical dimensions, material specs, and connection details. • Run the necessary load, deflection, and connection checks. • Produce a signed and wet-stamped document acceptable to my local building department, including any supporting calcs they typically request. Let me know your state of...

I’d like to schedule regular one-hour online lessons—one, possibly two per week—to help me build solid skills in AutoCAD Electrical. I’m starting from a beginner level and would like you to guide me with clear, step-by-step instruction rather than just demonstrations. The main areas I want to cover are: • Basic functionality and core drawing tools so I can navigate confidently the single line diagram. • Advanced electrical design workflows, including schematics, panel layouts, and intelligent symbols. • Troubleshooting techniques—how to diagnose and fix common errors or unexpected behavior as projects grow. We’ll share screens, work through example projects, and leave each session with a short set of practice tasks so I can rei...

I need an experienced Fusion 360 user to correct errors in my electrical design. Requirements: - Fix both schematic and PCB layout issues - Resolve package issues, specifically incorrect footprints Ideal Skills and Experience: - Proficiency in Fusion 360 electrical design - Experience with schematics and PCB layouts - Strong knowledge of electrical components and footprints - Attention to detail and problem-solving skills

I have two non-commercial pergolas already installed and mounted on a newly built one-story steel rooftop deck. Each unit sits installed on four factory aluminum inserts that are through-bolted to the deck; the pergola posts are anchored to those inserts with single 10" bolts at the base. The city will only sign off once a licensed engineer confirms the assemblies can resist local wind pressures and possible up-drafts at roof level. I can supply a full package of blueprints, photos, and existing engineering specifications for both the deck and the current pergola installation. What I need from you: • Complete wind-load analysis in accordance with the applicable building code (IBC / ASCE 7) and current building codes. • Recommendations for achieving compliance&m...

I have detailed plans already for a 20ft container home. Please verify 150mph winds and nc code & stamp the drawings Requirements: - Licensed structural engineer in North Carolina - Experience with residential building projects - Knowledge of NC building codes and regulations Please provide samples of previous work and a timeline for completion.

I need a clean, fabrication-ready 2D drawing for a run of mild-steel pipe work. The focus is on clarity for the workshop: every cut length, branch, flange, and connection must be easy to read and dimensioned so the fabricator can get started without coming back for questions. I will share my hand sketch and the measured take-offs as soon as the project starts; you convert that into a professional fabrication drawing and return it in PDF format. If you prefer to draft in AutoCAD or similar, that is fine—just make sure the final file I receive is a print-ready PDF. Deliverable • One PDF showing the complete MS pipe layout with all dimensions, elevations, and labelled components ready for immediate use on the shop floor. I am ready to answer any clarifying questions quickly so...

I regularly receive 2-D shop drawings in DWG format for structural members such as universal beams, tapered-flange channels and angle bars. Every member is detailed with holes and welded plates, yet the files arrive on plain layers, so nothing is pre-sorted for you. Your task is to open each DWG, read the geometry accurately and export a clean, fabrication-ready NC1 file for every part. A typical job contains anywhere from five to thirty drawings, depending on project size, and I’ll pass them to you in batches as they come off the design desk. Because there is no layer coding, I’m counting on your experience with AutoCAD, Advance Steel, Tekla, SDS/2—or any workflow you prefer—to spot every hole and plate edge correctly before generating the NC data. Please name ...

I need an architectural engineer to draw up engineering for a carport I bought used online. I need it for our city permits. I can provide images and measurements for an accurate drawing.

We are renovating an approximately 8,100 square foot existing commercial retail building in Indianapolis, Indiana. The project layout has already been developed and is in the final stages. We are seeking an experienced commercial architectural designer or CAD draftsperson to convert hand-drawn plans into a professional AutoCAD drawing package and prepare a coordinated architectural and MEP drawing set for engineering review. This is an existing commercial building that will be redeveloped into multiple tenant spaces consisting of: * Cell Phone Store * Convenience Store * Laundromat The selected freelancer will prepare a complete, well-organized drawing package that accurately reflects the final layout and can be reviewed and finalized by our engineer. Scope of Work Existing Condition...

I have a permit set covering a new run of warehouse storage racks plus several EV–charging stations for a site in Poway, California. Before I submit to the city, I need a California-licensed civil (or structural) engineer to review the plans for two things: • Full compliance with the current California Building Code • Seismic adequacy of the warehouse rack design in line with ASCE 7 and CBC Chapter 23 You do not need to check fire, electrical, or accessibility items—those are handled elsewhere. The EV-charger portion is already covered for seismic; the racks are the only elements that still need your stamp. Deliverables 1. Mark-ups or red-lined PDF of my drawings highlighting any code or seismic issues 2. If revisions are required, a brief memo or calculation...

Following are the roles and responsibilities for this position: Project management of technical design aspects for a Heat Pump project : Attend the two weekly meetings for project development. The first meeting is for coordination between the client and the EOR . The second meeting is for coordination between all parties and the manufacturer of the heat pump system. Attend any breakout meetings required to discuss technical details of the project. Review project deliverables including but not limited to: EOR drawing design submissions (60%, 90%, 100%, IFP) EOR specification submissions Vendor submittals for equipment purchased by client Coordinate with the EOR and equipment vendors to ensure the purchased equipment contains the necessary functionality for the project. Oversee equipment fab...

I have previous drainage plans in DWG/PDF and now need a dedicated shop drawing that zeroes-in on the raft foundation’s drainage. The core of the task is a clear, fully-dimensioned detailed drainage layout that meets recognised international standards (e.g., BS EN or equivalent). No material schedules or construction sequencing are required—just the precise layout. Please base the work on my existing plans, updating levels, pipe sizes, slopes, manhole positions and any necessary legends or notes so the drawing is construction-ready. Deliverables • Editable AutoCAD (.dwg) file and matching PDF • All invert levels, gradients, pipe diameters and references to tie-in points shown • Title block updated with project information and revision index Acceptance crit...

I’m looking for an experienced structural engineer to prepare a basic member schedule for a steel grain shed. This is for preliminary estimating and material take-offs only, not a final certified design. Project Details: * Wind Region A * Building size: 42m (L) × 42m (W) * Eave height: 9m * 12m lean-to on one side * Parallel chorded roof trusses * UB columns * UB rafters to the lean-to * Angle bracing * 18m clear-span sliding door on one gable end * 1 × 6m sliding door on the opposite gable end * 3m high reinforced concrete walls between the columns (grain shed application) Required Deliverables: * Preliminary member schedule for all primary steel members. * Indicative sizes for trusses, columns, rafters, bracing and major connection members. * Steel tonnage estimate,...

Futuristic Aerospace Systems Designer | Mega-Scale Spacecraft Concept Development I am developing a long-term futuristic spacecraft concept focused on the intersection of aerospace engineering, space logistics, and entertainment technology. The project explores the design of a mega-scale spacecraft architecture (approximately 5 km in scale) requiring advanced engineering studies, including structural analysis, orbital mechanics, propulsion concepts, energy systems, materials, artificial intelligence integration, and large-scale mission planning. The concept has potential applications in: • Future aerospace and space logistics systems • Space infrastructure and exploration concepts • Simulation, animation, VFX, and entertainment industries • Science-fiction world buil...

(Only available in France and DRC freelancer) I will issue a full drawing package—over 1000 m²—for a new development in the Republic of Congo. If you are a full-case designer or Agency who can undertake the construction drawings of building structures, HVAC, and electricity, you can also contact me directly. At present, the project is going to start within 1 month, and we will start drawing construction drawings soon. If you are interested, please send me your quote structure. What needs checking • ONAT and other majors DRC licensed certification • Architectural, structural, HVAC, plumbing/water and electrical construction drawings. Key tasks • Spot and correct dimension errors, note inconsistencies, missing call-outs and clashes between ...

Requiring a plastics/mechanical engineer to design 3 x rigid poly water tank systems for truck mounting, sized approximately: -Tank 1: ~8,000L -Tank 2: ~13,000L -Tank 3: ~15,000L Each tank needs: -Rigid HDPE/polyethylene tank (rotomoulded), UV-stabilised, baffled to reduce surge -Chassis mounting points rated for on-road heavy vehicle vibration/load (ADR compliant) -Manhole, vented filler cap, overflow, drain -Full outlet kit: suction, gravity discharge, isolation valves, camlock/BSP fittings, level gauge -Water cannon (adjustable jet-to-fog, rotating/elevating mount) -Rear dribble bar, adjustable width, pressurised and gravity-fed options Deliverables: -3D CAD (assembly + parts) for all 3 sizes -2D manufacturing drawings, tolerances, BOM -Mounting/structural calcs (FEA summary) -DFM rec...

I need mechanical mould drawings modified and dimensioned. These drawings are to be exported from SolidWorks and created in AutoCAD. Ideal Skills and Experience: - Proficiency in SolidWorks and AutoCAD - Experience with mechanical drawing and dimensioning - Attention to detail and accuracy

Backgroubnd: A rod mill is a rotating grinding machine that uses steel rods to crush and grind ore or other materials into smaller particles. A rod mill rod charger is a mechanical loading system used to safely store, handle, and feed steel grinding rods into a rod mill. It reduces manual handling, improves safety, and allows controlled rod delivery during mill maintenance or operation, supporting efficient grinding performance and easier rod replacement. A rod mill rod charger mainly consists of a rod storage bench, where the bundle of grinding rods is placed, a rod indexing system to separate and control individual rods, a transfer mechanism to move each rod from the bench to the loader boom, and a rod mill loader boom that delivers the rod into the mill. The charger also includes a rail...

We are looking to hire an experienced Mechanical Design Engineer to help us design a TMR Feed Mixer Machine. We already have working reference videos and a basic machine concept. We do not need someone to invent the machine from zero. We need an engineer who can study the reference, calculate the correct material thicknesses, and prepare fabrication-ready drawings. Scope of Work: Study our working reference video and machine requirements. Design the complete TMR mixer body, including side panels, bottom shape, end plates, frame, shaft, paddles/augers, discharge door, and supporting structure. Calculate proper sheet thickness in mm based on expected load, feed weight, machine size, and structural strength. Suggest suitable materials for sheets, shaft, paddles, bearings, gearbox mounting,...