CAD/CAM Jobs

Update CAD files for a 16X32 traditional and 20X40 modern

We are looking to create a room divider that can be mounted into place without requiring any drilling. This is achieved by "clamping" it between the floor and ceiling with adjustable feet (As seen in picture 2). Each divider is 2.5 m tall and 1 m wide. It is meant to consist of 3 vertical bars and 5 horizontal, with two pairs of feet at the top and bottom of the frame. The spacing of the vertical bars is 50 cm, and the horizontal bars are 83.3 cm. The thickness of the bars are 33.33mm. The dimensions of the spacing should roughly be the same as in picture 1. These measurements are flexible if you have better suggestions. The adjustable feet in both ends of the frame should be the same as in picture 2. Each bar will have cut-outs that will make it easy for the customer to piec...

We are a builder looking for an experienced draftsman who is familiar with building principles and heights in Australia. The draftsman will be responsible for drawing up plans and elevations based on existing designs and client requirements, as well as producing a full set of drawings for construction. Requirements: Extensive experience as a draftsman, with a portfolio of previous work to showcase Familiarity with Australian building codes and standards Excellent attention to detail and ability to produce accurate, precise drawings Strong communication skills and ability to work collaboratively with clients and builders Availability to start work immediately and complete projects on time If you are an experienced draftsman who meets these requirements, please submit your resume and portf...

I want to develop a 3d model for a retro-modern telephone. The size would be similar to normal telephones. The shape would be similar to pictures I will provide. All the components of the model will have to be named and with 3d model, I will also need 2d sketches of the same.

Designing protective panels for vehicles. Proficient in Solid works, NDA required. Project is in West Florida. Initial effort starts soon, follow on likely.

Designing protective panels for vehicles. Proficient in Solid works, NDA required. Project is in West Florida. Initial effort starts soon, follow on likely.

Designing protective panels for vehicles. Proficient in Solid works, NDA required. Project is in West Florida. Initial effort starts soon, follow on likely.

We are looking for a civil engineer for periodic consultancies. Requirements: - excellent knowledge of UFC - well acquainted with UFC certifying bodies

I'm looking for a specialist to design a bungalow which I wanted to construct in my farm! The materials to be used should be brick, and I also want to include a terrace and landscaping/gardens in the design. It is important to me that no detail is overlooked, so I'm hoping to find a qualified expert that can achieve my vision. The ideal candidate will have extensive knowledge and experience in this type of project, and be able to create something that is stylish, functional and timeless.

Hello there! I am looking for someone to produce 4 small drawing in CAD 2D in size A3 based on instructions I have provided. The whole project needs to be completed within 12 hours.

We want to expand our range of high-quality kids bikes with nice, light and ergonomic city-bikes, perfect tools to go to school. We need to determine the design and global geometry for 20", 24" and 26" bikes, in order to send the drawings to our supplier who will made the technical drawings with the adaptation needed for production. We would like to develop a step-through model with a net design, lin the general idea of the pic attached but on a mechanical bike and on kid size.

I am looking for someone to create a CAD drawing to scale for me. I need a 2D drawing and I have an existing model that can be used. The desired size of the drawing is small. I expect the contractor to be knowledgeable in CAD software, with an eye for detail, as well as strong time management skills. This project should be done in an efficient and timely manner, so that my expectations can be met. i have 4 different drawings that i need converted that are simlair with small changes, i have the raw figures in PDF (attached) and Visio

I've created a nail polish bottle using the AI platform MidJourney. I now need to recreate it so I can tweak it. I therefore need someone to recreate it to the same quality level, so it you cannot tell it if it is real or not. I'll be needing a few variations of the shot. - Some close ups at different angles - Some different colour bottles (x3-5) - Some with the nail polish unscrewed showing the applicator next to the bottle or leaning on the stone surface next to it. - Some with the nail Polish on its side and nail polish spilt on the surface. Will need to add some writing to the front of the bottle too, visible on all shots. Attached is an image for reference. Background and surface must be similar/industrial feel. Happy to take creative suggestions that may improve ...

I need to have this STL file slightly changed and then finalized to be ready for a 3D print. Things I want to be changed: 1. Remove all of the indentions, logos, numbers etc.. on the top of the wing, it should just be flat surface. 2. Keep the same scale but the Y value should be 310mm in width. So increase the size of the whole thing. 3. No piece should be less than 2mm in thickness so it will not be weak when printing. 4. I want to add a 4th row to the wing. So looking at the current file you can see there is only 3 (well call them slats, but they are the slats that make up the wing.) I have attached photos showing most of the cars have 4 slats. Can you move them all down a little like shown in the picture and then add a smaller slat at the top. 5. Remove the hole in the front of the no...

We have a 3D scan of a factory. We want to place a SolidWorks model into this scan so we can check fitment and layout. At this stage the 3D scan file is not compatible with Solidworks. It is also very large to handle. We would like someone to look at this and see if they can convert the 3D scan files into a Solidworks compatible file and then intergrate our Solidworks model. The 3D scan can be defeatured/reduced in detail if required.

Environmental Engineer to review and sign off on South Carolina Storm Water Protection Plans. Work would be on a project basis as work comes in. We have a team of engineers that are located in CO, but we need an engineer licensed in SC to review the books for accuracy and policy and then stamp.

I have plans drawn and am in need of a land/site surveyor in AUSTRALIA identification, levels, with flood benchmark level.

I need an underwear fabric specialist to help me with which fabric blend to use with my new product

To clarify. This is for a bicycle. We are looking for a small sized motor that is mounted on a bicycle type transportation. I am looking to have a 3D printed Wankel motor created using plastic (or metal) material. The desired output is a prototype. My goal is to find a skilled freelancer who can create this 3D printed Wankel motor with accuracy and precision. The material must be 3D printed in plastic and have a high feature size. By this I mean each component needs to be individually printed, we are not looking for a general image of this, rather a plastic prototype. I need the prototype of this Wankel motor created swiftly and with quality results. A successful completion of this project will allow me to evaluate and test the design work for possible future projects. Experienced freelanc...

Looking for someone experienced to do a CAD drawing/ layout of my car business premises. Someone who can add ideas about how to more utilise the space and add design ideas for the building exterior and car park also. Pictures will be provided.

I need some drawer badges made for my Milwaukee Packout modules. They must must must have the clips on the back of the badges so they fit the modules correctly. I do not want to glue these things onto the module. Here is a link showing a guy that makes these. This guy won’t give me the file so I am not interested in purchasing from him. I only want the file bc have to 3D print a ton of these.

draw me a house plan with the building blueprints. lean to roof towards the porch, overall dimensions of 50'x28' including the porch, with out the porch 50'x20'. Attached is a rough drawing to build from.

Our little company (29 employees) called EXTECH, has a need for architectural drafting work, mainly shop drawings and fabrication drawings of the projects that we design and fabricate Check out to see what we build. We are looking for some help now and possibly on an ongoing basis. -Billl Voegele, Pres.

I will give kicad schematic, the freelancer has to prepare the layout in kicad as per the given constraints of pcb size and electrical design guidelines ( will be given ). the already created part library will be shared. The end pcb design files have to delivered.

I am in the ideas stage of starting a company so I'm looking for someone to draw a 3d cad design of my idea so I can present it to tech investors IM looking for someone who has vast experience in cad and engineering and manufacturing, would have to have a degree in engineering and have many years experience with that kind of thing and technology. I have made a prototype proposal , also the freelancer would have to be local to Gold Coast Australia since I'd have to be doing 1_1 with them to oversee the project

One day training on RC Cad for BBS for walls raft piles beams columns

I have a 40 ft wide x 80 ft long and 18 feet tall (floor up to bottom of trusses) barn. I am installing in a second floor that will be 16 wide x 80 long. I've created the conceptual layout in Visio, but need help getting this into a more refined final layout for the carpenters/workers to work from. I have the barn already built with basic 200 amp electric panel installed. I have a septic run to the barn and a well hydrant. The drawings show location of each. I also have the drawings from Menards for where all the 6x6 poles are located. I'm having trouble with the stairs to maximize space in the barn. This barndominium is for a hunting and recreation property that will be used seasonally and some weekends throughout the year. Ideally, the carpenters could work from your p...

Necesito un plano en autocad en 2D para una casa, le enviamos medidas del terreno y planos similares a los que queremos en cuánto a compartimiento, lo que necesitamos es que esos planos se adapten de la mejor manera a la forma de nuestro terreno. Casa 1 sola planta, con 3 dormitorios, un cuarto de estudio, dos baños, sala cocina y comedor un solo ambiente, doble garaje. Patio grande para piscina a futuro

I am Looking for Aerospace Engineer with an experience in Design and Engineering of Radio Controlled (RC) model of Aircrafts or Drones. Small Project, need design and engineering of detachable Wings and Tail unit for predetermined configuration of small RC model of all electric Aircraft / Drone (880mm Wing Span, L= 1600mm, MTOW 55-60kg), as shown in the attached images. More Images and info will be provided after job acceptance. Project need to be completed in 3-4 weeks SKILSS ARE REQUIRED: Aircraft Design and Engineering, RC Aircraft Models / Drones Design and Engineering, Aircraft Performance Calculations, Mechanical / Structural Engineering, CAD/CAM JOB INCLUDES: 1. Calculations of major performance parameters of the predetermined RC Aircraft/Drone Model configuration including, bu...

I am looking for a freelancer to create a 3D model of my current project using AutoCAD. In addition to the model, I would need edited versions of the design. The turnaround time for this project is 1-3 days. I'm expecting a high-quality and professional 3D model, and I'm willing to pay for it. If you think you have the skills and the expertise to take on this project, please let me know. Thanks for your interest!

Hi! I have the blueprints for a 36sqm tiny home on AutoCAD file, and I need to get a 3D model elaborated on Sketchup from those plans. All the general measurements on plan and frontal views are in the DWG, as well as the furniture, appliances and electrical elements (lamps, outlets, lamp switches, etc). I would like to have all the elements shown in this DWG file, shown in a Sketchup model, with the same measurements and location. The walls of the plans are shown as a maritime container but that doesn't need to be drawn like it, it can be simple plain walls. The signs on the plans are in Spanish but are simple household elements so it should not be a problem. There is some material/textures that I know already how they need to be, like: wall colors, type of floor tiles, window fra...

In the attachement, you find a STEP file. Convert it to a CREO file. Don't just import the parts, but design them from scratch in Creo parametric. Use any of these Creo parametric versions: 3 / 4 / 5. When finished, make a dummy entry. I'll then contact you via private chat, where you can upload the zipped project folder for checking. Thank you!

Need an expert for doing a small CAD project

I am looking for an experienced engineer to develop a custom gearbox design, and a prototype of that design, for me. The gearbox design needs to be tailored to my requirements, and it needs to be made with metal. It will be a large gearbox, used specifically for power transmission. I expect the engineer I hire to provide expertise and deliver exceptional output. The chosen engineer should have a proven track record in complicated custom gearbox design and/or production. Experience in the usage of advanced CAD and CAM software is preferred. The engineer must also be able to advise and explain the intricacies of the design and offer guidance during the prototype's construction phase. This project requires someone who is familiar with best practices and modern engineering techniques. I l...

*Wooden Iron Table* Need to Design & Manufacture wooden sturdy Iron Table - wall mount or stand alone The iron board should be made of wood but the stand frame should have Metal with a wire Guide, Should be easily portable, and fold & Storable, Could be made - either Solid Wood with water proofing or with water proof plywood

Hi there - I am designing a pattern for crystal glass tumblers (crystal glass is more reflective than regular glass). I have a sketch of the design - and would like someone to render my design in glass. I have added a sketch of an existing glass, with a horizontal + vertical pattern. My pattern is very similar, but at 23 degrees instead of horizontal. Be great if somebody is able to help?

looking for a PCB designer having experience with multilayer PCB (up to 8 layers). Who can work with us long-term and should be available on a daily basis. Start your proposal with the word Ramadan. we need to hire minimum 5 PCB designer on project basis.

Hi there! I'm looking for a talented freelancer who can perform a wave simulation using Solidworks . it would be to carry out a wave simulation on solidworks in a wave tank basin with an obstacle like below in the video, I've drawn something to explain a bit more what I want here it is. I want just to see the velocity and the pressure on the obstacle as well as the height the water will be projected after the impact on the obstacle Need this done within 18 hours and max price I can afford is 20 USD

Design a logo for my start up. Name of the company is " D.A.N.Q.S" use colors like black , white and grey. company is about structural design,BIM (building information modelling) and BIM automation.

Looking for jewellery designer for customised products of diamond and gold jewellery

need the robot shell made of fiber glass and the metal chassis that will hold the two robot arm make in into 3d drawing molding that you can manufacture it ^^^shell should be made of fiber glass and able to manufacture in real life with real dimensions ^^^ chassis from the ground up to the height that upper body is shown I will attach an example picture of a shell just example do your own design I will attach the height of the machines that robot going to cook with i wil attach the the size of the robot arm flange to attach to the chassis metal frame chassis to the bottom of the robot arm robot arms come in red with black so keep it in mind when you set color

I need texas pe stamp for my project. Max buget for stamp is 70 usd.

A structural engineer for a foundation drawing project is needed. Engineer must have texas usa pe stamp.

Recreate this :2949044 But do it with 1 1/4 BSP thread. Prefer you use FreeCad.

Hello, We are looking for Quantity Takeoff expert to find-out material quantity for Renovation projects. Thanks!

A structural engineer for a foundation drawing project is needed. Engineer must have texas usa pe stamp.

Draw a plan (Floor) in detail and give a decent external elevation of the building

im looking for someone to design me a 3d trailer chassis with wheels and 450kg leaf spring suspension single axle trailer i will provide dimensions in 1 week id like it in a dxf file aswell so i can transfer to autocadd, id like a full cutlist of materials using 75x50 as the main chassis frame and 50x50 as the sub rails

After electrical repair work patchwork left uneven paint coloring. Would like artist to create mini mural to cover. Design concept can be open, abstract, but colorful.

i need a 75k office building mapped out, hvac, electric, etc. i have the preliminary floor plans but the suite