Arquitetura de construção Jobs

We are converting our loft into a habitable room and the new dormer is almost ready now. However we've reconsidered the original place of the new loft staircase and now we need the front chimney breast disconnected at the loft level (to be removed) and the remaining chimney stack above - supported; as well as calculations and drawing of a new loft staircase opening which will be in the place of the removed chimney. Attached, you can find more details - hope these explain things better. Please let me know if you could help. Look forward to hearing back,

# Office Interior Designer Needed for Complete Commercial Office Design We have recently taken a new office space and are looking for an experienced **Commercial Office Interior Designer** to design the complete office interior. We already have: * Video/photos of the empty office space * Existing floor/layout plan provided by the housing board * Measurements/layout information of the space We need someone who can understand the existing space and create a **practical, modern and professional office interior design** around it. ## Scope of Work The designer should provide: * Complete office space planning * Reception area design * Workstation/seating layout * Founder/Director cabin * Meeting room * Employee seating arrangement * Storage requirements * Pantry area * Electrical point p...

I need a Florida-licensed structural engineer who can work on an upcoming structural project. The scope calls for full structural analysis and design, a thorough building-code compliance review to satisfy state and local jurisdictions, and ultimately an inspection report with the engineer’s signed certification. If you are currently licensed in Florida and have recent experience producing permit-ready structural packages under the Florida Building Code, I’d like to hear how quickly you can begin and what information you would need first.

I already have a completed site plan for a property in Pennsylvania that show a new driveway layout. Before I submit it to the city I need a Pennsylvania-licensed design professional to give it a final technical review and place their professional seal on the drawing. The drawing is finished, so I’m not looking for design changes—just a careful check to confirm it meets state and local requirements, followed by your approval stamp. Deliverables • Marked-up PDF (if you find any minor corrections) • Final signed and sealed PDF ready for municipal submission Please let me know your turnaround time, and any questions you have about the file format or city submittal standards. Within a budget, I just need drawings sealed.

I need 6 projects on which you already worked and you have BOQ, Markups and drawings of these projects available. Each package must represent a brand-new build (no renovations, extensions, or alterations) and already be fully compiled—the goal is to receive projects that can stand on their own without any missing pieces or follow-up clarifications. To qualify, every project must include all of the following: • Complete Bill of Quantities (BOQ) with measurements in metric SI units (m, m2 etc.) • Full drawing set having SI units (m, m2 etc) - Note that I don't need in English units • Markups • GC-level scope coverage so that all major trades and divisions are represented If a project meets every requirement above, I will release US $4 for that file. Up t...

I'm looking for a skilled structural engineer to assist with a residential renovation project. The specific task involves the removal of a header from a pantry. Key requirements include: - Expertise in residential structural modifications - Ability to assess and ensure structural integrity post-modification - Provide detailed plans and calculations Ideal Skills & Experience: - Licensed structural engineer - Experience with residential projects - Strong knowledge of building codes and regulations Please include relevant experience and credentials in your bids.

CAD & CorelDRAW Designer Required – Wayfinding Signage Looking for an experienced designer with AutoCAD and CorelDRAW skills for wayfinding and directional signage projects. Requirements: * AutoCAD & CorelDRAW expertise * Experience in signage/wayfinding design * Shop, fabrication & installation drawings * Good knowledge of signage materials and detailing * Accurate and professional work * Infrastructure/railway/metro signage experience preferred Please share your portfolio, experience and quotation.

I have a set of existing design concepts for a custom kitchen and now need them translated into full AutoCAD shop drawings that a cabinet maker can take straight to the workshop. Every sheet must carry complete specifications with joinery details, right down to the last hinge. What I will give you • PDF/DWG concept drawings and finish schedules • Overall room dimensions and appliance schedules What I need back • Scaled plan, elevation and section views for every cabinet run • Detailed joinery call-outs showing carcass construction, door styles, shelf pins, etc. • Cabinet framing details, handles & hardware positions, and all required electrical and plumbing cut-outs clearly dimensioned • A cutting list (board, edge tape and hardware) ready ...

I need a complete MEP package for a new residential build of roughly 350 m² spread over three floors, with two separate apartments on each level. Your focus will be on two disciplines: • Plumbing – I already have the fixture layout, so I’m looking for drawings that show the full water-supply and drainage routes, plus detailed specs and pipe sizes for every run, valve, and connection. • Electrical – Kitchens and bathrooms are the priority; I need circuiting, load calculations, panel schedules, and placement of outlets, switches, and protective devices that comply with local residential codes. The final delivery should include coordinated CAD/Revit drawings (PDF + editable files), a concise calculation report, and any installation notes that a contractor ...

I need a stamped boundary survey of my vacant Philadelphia lot and a complete set of zoning drawings that the city will accept for a permit. The goal is to turn the parcel into a private driveway with drive-through access and legal curb cuts at both street fronts. Because there is no existing survey or prior drawing, the work starts from scratch. I will rely on your field measurements, research into city records, and any required coordination with Philadelphia’s Department of Streets and Zoning. Once the survey is set, I’ll need an architect-prepared site plan showing pavement layout, curb-cut dimensions, grading, storm-water notes if required, and any other details the permit counter typically asks for. Deliverables (PDF and CAD preferred): • Signed boundary/topogra...

I need a structural plan for an existing building. This is to obtain a permit to finish converting it into a seasonal cabin for two people. This building is on a 6" deep granite gravel bed for skid support. Very solid. It is 24x32 in size, with 2x6 floor joists on 12" centers and 2x8 rafters on 16" centers. Per the local inspector, once I have this drawing, I can proceed with finishing the building. I can send any pictures if needed. Requirements: - Should include foundation details - Must be accurate and meet local building codes Ideal Skills and Experience: - Licensed architect or structural engineer - Experience with residential cabin projects - Knowledge of local permitting processes

I'm seeking a skilled floor plan designer to create a two-story residential floor plan. The home should feature a distinctive circular shape with an open dome at the center. Key requirements: - Two-story residential layout - Circular design with central open dome - Attention to spatial flow and natural light - Experience in unique architectural designs according to Indian climatic conditions. Ideal candidates will have: - Strong background in residential floor plan design - Expertise in unconventional building shapes - Knowledge of Indian building codes and regulations - Proficiency in design software (AutoCAD, SketchUp, etc.) Please provide samples of similar work and a brief approach to this project.

I need a licensed Ontario Land Surveyor to visit a residential lot in Rockwood as soon as possible. The main goal is boundary verification, with a particular focus on confirming that the freshly poured foundation sits within the required setbacks. Because I have no previous survey documents, you’ll be starting from scratch: establishing accurate boundary lines, marking (staking) the corners and key points on-site, and then tying those points to the new foundation walls. Please include in your proposal: • Your OLS licence number or firm registration • A brief outline of the field work you’ll perform (total station, RTK GPS, etc.) • The format of the deliverable—at minimum, I need a signed sketch showing boundary dimensions, stakes placed, and the meas...

The site plan for my property needs a professional landscape‐design drawing that highlights two key elements: an inviting network of pathways/walkways and at least one signature water feature. I already have a rough sketch and measurements; what I need now is a clean, to-scale drawing (DWG/PDF) that a contractor can build from without guesswork. Scope • Translate my hand notes, photos, and site measurements into a detailed CAD layout. • Show pathway widths, surface materials, slopes, and junctions clearly. • Illustrate the water feature’s footprint, depth, pump location, and connections to power/water. • Indicate existing trees and major plant beds only as context—full planting design is optional and can be quoted separately. Acceptance Criteria ...

I'm seeking a skilled designer to create a floor plan for a modern-style barndominium. The layout must be functional and aesthetically pleasing, incorporating the following requirements: - 2 bedrooms and 2 bathrooms, with both bedrooms on the same floor. - Future loft space to be included. - Open-concept living area that promotes a spacious, airy feel. Ideal skills and experience: - Expertise in modern architectural design - Experience with barndominium layouts - Strong understanding of open-concept living spaces Please provide samples of previous work and a rough timeline for completion.

I'm looking for an experienced architect or designer to create plans for a traditional-style, two-story residential house on a detached single plot. The design should incorporate ample front, rear, and side land. Key requirements: - Traditional architectural style - Two-story layout - Utilization of surrounding land Ideal skills and experience: - Expertise in traditional home designs - Experience with two-story residential layouts - Strong understanding of land utilization Please provide examples of similar work.

I already have the complete architectural drawings in DWG/PDF and now need a detailed under-floor heating (UFH) layout for the entire building. The plan must show every zone, manifold and circuit clearly so that the installation team can build straight from the drawing. Here’s what I expect: • A fully coordinated UFH plan in AutoCAD with correct pipe spacing, loop lengths and labelled circuits, keeping each loop within recommended limits. • Legends, notes and a simple pipe-length schedule included on the sheet for quick material ordering. Deliverables: • Editable AutoCAD (.dwg) file on the same coordinate system as my base plans. • Print-ready PDF set. • Pipe-length schedule (embedded table or separate XLS). If you have proven UFH design experience...

# TopSolid Wood Specialist Needed — Custom Kitchen Furniture Assembly (Ongoing Monthly Work) ## About Us WERDEN is a premium kitchen and interior furniture brand based in Baku, Azerbaijan, with our own showroom and in-house CNC production facility. We design custom kitchens and interiors for local and international clients. ## The Job We provide you with AutoCAD drawings and on-site measurements for a kitchen project. Your job is to assemble the full project as a working, production-ready model in **TopSolid Wood** — correct panels, dimensions, materials, hardware placement, and door/cabinet structure — matching our design and production standards exactly. The final file must be fully editable and ready to send straight to CNC (correct part separation, nesting-ready, a...

We are converting our loft into a habitable room and the new dormer is almost ready now. However we've reconsidered the original place of the new loft staircase and now we need the front chimney breast disconnected at the loft level (to be removed) and the remaining chimney stack above - supported; as well as calculations and drawing of a new loft staircase opening which will be in the place of the removed chimney. Attached, you can find more details - hope these explain things better. Please let me know if you could help. Look forward to hearing back,

I’m preparing to develop a ground-plus-two building for retirement community. Location: Palakkad municipality, Kerala, India 7m Road on south side AI can be used for ideas and designs needs to be on CAD. Needs to be 100% VASTU Following are minimum requirements: 1. One floor with reception, nursing station, lift, 2 stair cases (One for fire), Maid room with bath attached, sr living master suite (bedroom, reading area, walking closet and bathroom) , kitchen, poojaroom, living room, parking 2. Another floor with 4 individual bedrooms with attached bath room, common living space. linen rooom, utility room, pantry 3. Next floor with 2 individual bedrooms with attached bath room and a sr couple suite (bedroom, reading area, walking closet and bathroom), gym Exact plot dimensionsare ...

I need a full set of architectural construction drawings for a new apartment building produced in AutoCAD, formatted on A3 sheet sets. An outline schedule is already prepared and attached; once we start, I will forward the base architectural files and any additional reference material you need. Scope of work • Produce coordinated floor plans, sections, elevations and all related construction details exactly as indicated in the attached drawing schedule. • Maintain my title-block standards and layer naming. • Supply each submission in both PDF and native .dwg. Milestone flow 1. 20 % – Tasks 1 & 2 completed and issued for review 2. 50 % – Tasks 3 & 4 3. 80 % – Tasks 5 & 6 4. 90 % – full-set markup revisions returned and inc...

Title: Victorian Building Designer and Permit Coordinator – Ongoing Work We are seeking an experienced building designer and permit coordinator to manage the complete post-sale documentation and building approval process for a range of standard expandable cottages in Victoria, Australia. This is not simply a drafting job. We need a reliable person who can take each customer project from initial site information through to completed plans, consultant coordination and building permit approval. Our business has established 20ft, 30ft and 40ft expandable cottage models. The core designs are standardised, but each project requires site-specific documentation, coordination and approval. The successful applicant will initially complete one paid pilot project. If successful, this will b...

Your first line needs to be " This is my Fixed price no Negotiations or Discussions" if this line is not your first your offer will be skipped please make sure you have this line in your description Strict note - No under quotes put exact price of your bid , No discussion to negotiate price after you bid you will be rejected for this and future projects . Absoultely no FISHING AND WASTING EACH OTHERS TIME. IF YOU WANT TO DISCUSS IT MEANS YOU DONT KNOW THE JOB BETTER DONT PARTICIPATE . I have done another project like this will give the permit documents which was approved so you can follow that once I select the candidate. Adding SRP electrical company diagram also sent by them to follow the pattern for Electricity I have already drafted the narrative, background data and most...

I'm looking for a skilled designer to create a comprehensive layout for both a residential and commercial 6 acre property that has a fully functioning tree/plant nursery. The design should encompass: - Exterior: large Greenhouse in front of pond, identify location for future house, area for growing outdoor plants, event space for weddings, shipping containers changed into functional spaces (next to greenhouse), 1 large space dedicated to having a large fenced in yard with animal stalls. - Landscaping: Gardens, pathways, beautiful natural pond. I’ll attach photo of what the property looks like now to give you a solid starting point. Ideal candidates will have: - Proven experience in property layout design, both residential and commercial. - Strong portfolio showcasing past wo...

I’m preparing a showcase project that proves my command of AutoCAD, Revit and full-scale BIM workflows. The assignment centers on a modern residential building and I need every drawing and model produced to Advanced LOD 400-500 so the construction intent is unmistakable, down to precise assemblies, materials and coordinated annotations. Scope The work starts with clean 2D drafting in AutoCAD—plans, sections, elevations—laid out on professional sheets that follow standard line weights, layer conventions and metric/imperial scales as appropriate. From there, the content is to be migrated (or recreated) in Revit for a fully intelligent BIM model. Doors, windows, structural members and MEP placeholders must carry the right families, parameters and schedules so the model is...

I’m setting up a steady, month-to-month engagement with a seasoned Tekla Structures professional who can own the full detailing workflow on a series of industrial projects. Every month I’ll pass you new steel packages that need to move seamlessly from concept to fabrication, so I’m counting on your deep command of Tekla to keep the pipeline flowing. Scope of work – Build clean, well-organized Tekla models straight from my IFCs, sketches, or PDF mark-ups. – Produce all GA drawings, assembly drawings, single-part sheets, and NC/DSTV files ready for the shop. – Generate bolt and material lists plus any custom reports I request so purchasing can cut POs without delays. What I’m specifically after You’re a senior-level detailer who has a...

I need a comprehensive material takeoff for plumbing pipes based on architectural plans. Requirements: - Use of architectural plans to identify piping needs - Comprehensive takeoff including fittings and accessories Ideal Skills and Experience: - Proficiency in reading and interpreting architectural plans - Experience with plumbing material takeoffs - Attention to detail and accuracy

I’m ready to take a single-family home from concept to clear, build-ready drawings and I need an experienced residential designer to prepare both the full floor plan and the exterior elevations. The scope covers the entire home, so every level, room, and facade should be addressed in a coordinated set. What I will provide: lot dimensions, basic layout ideas, preferred style references, and any municipal guidelines that must be met. What I expect back: • Scaled floor plans that show walls, windows, doors, and core dimensions • Front, rear, and side elevation drawings consistent with the plans • Files delivered in PDF for quick review and the native CAD format for future editing To be considered, include examples of past work on single-family homes that show you...

I need a comprehensive site plan for an auto body shop, including: - Building layout - Parking spaces - Detailed floor plan with measurements The project should be completed within a month. Ideal skills and experience include: - Experience in creating site plans for commercial properties - Proficiency in architectural design - Attention to detail and accuracy in measurements - A civil engineering degree is required. Please provide samples of previous work.

My team is preparing for a new development phase and I need a licensed civil engineer to guide the entire technical process—from preliminary analysis through to final documentation. The scope is intentionally broad at this stage because I want your professional input on the most efficient path forward, whether that ends up centering on site grading, structural layout, roadway connectivity, or geotechnical recommendations. Here is what I expect once we define the exact brief together: • A concise work plan that flags key code requirements and milestones. • All calculations, CAD drawings, and supporting notes produced in software you specify (AutoCAD, Civil 3D, Revit, STAAD Pro, or equivalent). • A clear set of stamped documents ready for permitting, packaged with a...

I’m converting an attached garage in Anaheim into a Junior ADU studio that will share the main house bathroom; the only new feature is a kitchenette that is already fully designed. What I now need is a complete, permit-ready drawing package and someone who can walk it through the city until the permit is in hand. Your core tasks • Draft full architectural and any required structural/MEP sheets from my existing PDF design set, ready for City of Anaheim submittal. • Verify the layout against California JADU code requirements and Anaheim’s local ordinances, adding Title 24 energy documents and any other calculations the city requests. • Handle the permit process: compile forms, submit, track corrections, and provide revised drawings until final approval. Key...

Please don't bid if you are not certified for PA, USA. I need a licensed professional to stamp my detailed pole barn drawings for Pennsylvania approval. The barn is residential and under 1,000 sq ft. Requirements: - Must be licensed in Pennsylvania, such that City of Easton can approve it. - Experience with residential pole barn structures - Provide a stamped drawing for code compliance Ideal Skills: - Structural engineering - Knowledge of PA building codes - Attention to detail and accuracy

I’m adding a modest storage attachment to the rear of my commercial shop and need a licensed U.S. structural engineer to make sure everything is code-compliant before I submit for permits. The footprint is small, but the city still wants signed and sealed calculations plus drawings that show the new walls, roof ties and how the loads transfer to the existing structure. Here’s what I’m looking for you to deliver: • Stamped structural drawings (PDF and DWG) showing the connection details between the existing building and the new storage area. • Load calculations that satisfy IBC and local amendments. • A brief design summary I can share with the contractor and the building department. I’ll provide site photos, the original as-built plans and mea...

I’m looking to partner with a detail-oriented landscape architect who can take my residential projects from concept to build-ready documentation. For each site I will need a cohesive package that combines realistic 3D visualisations with fully engineered irrigation and precise planting plans. The relationship is intended to be long term; we have a steady flow of new homes entering design each month and I’d like to rely on a single professional who can maintain consistency across them all. Typical scope per project • 3D design – photorealistic renders and model files that clearly communicate form, materials and lighting • Detailed irrigation plan – pipe sizing, head layout, zoning and controller specifications suitable for contractor installation &bu...

I need a comprehensive plumbing design for a restaurant build, covering both water supply and drainage systems. Requirements: - No existing drawings or blueprints available - The drawings are for a 900 square foot kitchen/bar area - On-site visit to the property in Greenville, SC is preferred before drafting the designs Ideal Skills and Experience: - Expertise in plumbing design for commercial buildings - Experience with restaurant plumbing requirements - Ability to create accurate, detailed drawings from scratch - Local freelancers near Greenville, SC preferred for property visit Please provide relevant past work and experience in your application.

I am looking for an experienced architectural designer/drafter to create a complete set of barndominium plans for a shop with attached two-story living quarters. I already have the overall look, exterior style, and a strong starting point for the desired floor plan, which I can provide. This project will not be designed from scratch. I am looking for someone who can take my concept/reference plans, make the necessary modifications, and develop them into a complete, cohesive plan set. Overall Structure - 50' x 80' x 16' barndominium/shop - Concrete slab foundation - Approximately 25' x 50' footprint for the living quarters - Two-story living area - Large remaining area dedicated to shop/garage space - 3 RV-size overhead garage/bay doors - 1 additional standard-siz...

Quantity Surveyor / Cost Consultant – Water Park & Resort Development in Saudi Arabia I am looking for an experienced Quantity Surveyor / Cost Consultant to undertake a comprehensive cost analysis, cost estimation, and quantity surveying for a leisure and hospitality development located in Saudi Arabia, approximately 70 km south of Riyadh. The project includes: * Water park * Resort facilities * Chalets / villas * Supporting infrastructure and utilities * Landscaping and external works * Associated hospitality and recreational facilities The concept, designs, layouts, and overall master planning have already been completed. I am now looking for a qualified professional to review the available design information and develop a realistic and detailed project cost estimate based ...

I need a comprehensive inspection of a 1950s building with a partially collapsed roof. The goal is to determine if the exterior structure can be salvaged and if a new roof can be installed. Also, information if a 2nd floor can be added. Requirements: - Both visual and structural analysis of the entire exterior structure (walls, foundation, etc.) - Basic report with repair recommendations Ideal skills and experience: - Structural engineering expertise - Experience with older buildings - Ability to provide clear, actionable reports

I’m updating a complete residential floor plan and I need an experienced Turbocad user to turn my existing layout into a clean, construction-ready drawing set. The current plan is already sketched in Turbocad format, but it requires professional layering, dimensioning, room naming, and any minor adjustments needed for accuracy and consistency. Scope • Draft the entire home—every room, wall, door, and window must be reflected exactly as shown in the source file. • Apply clear layers for walls, fixtures, electrical, and annotations so contractors can toggle views easily. • Add standard dimensions, square footage calculations, and a keyed legend. • Deliver both the native .tcw file and a plotted PDF sheet sized for 24"×36". Acceptance ...

I’m starting with a blank slate on a 60 m × 50 m × 15 m steel portal-frame cattle shed and need the full structural and fabrication drawing package produced from scratch, following standard design specifications. You’ll take the concept all the way from initial sizing through to shop-ready documents. That means creating the structural model, optimising member sizes, detailing the connections and then translating everything into clear fabrication drawings and material schedules. I expect PDF sets for review plus editable DWG (or equivalent) files, and a concise calculation report that backs up the design assumptions. Experience with tools such as Tekla Structures, AutoCAD, Revit, or SAP2000 will be useful—use whatever combination you prefer, as long as the...

We are seeking an experienced structural engineer with strong **FRAMECAD and Light Gauge Steel Framing (LGSF/LSF)** experience to develop the structural framing package for a small commercial development based on the architectural drawings that will be provided. The project consists of several interconnected low-rise structures, including: 1. Reception and Office Building 2. Workshop / Covered Work Area 3. Staff Facilities Building 4. Small Utility / Security Structure The structural system is to be developed using **cold-formed steel framing and the FRAMECAD system**, with the design coordinated with the architectural layouts. Scope of Work The selected engineer will be responsible for developing the complete LSF structural package, including: * Structural analysis, design and engin...

I'm seeking detailed architectural plans for a traditional-style walkout home with 2-3 bedrooms and about 1500 square feet per level and a garage. The outside picture is an example only. Essential requirements: - 2-3 Bedrooms - Traditional architectural style - Comprehensive and detailed plans Ideal Skills and Experience: - Proven experience in traditional architecture - Strong understanding of residential building codes and regulations - Ability to create functional and aesthetic designs Please provide your portfolio and relevant experience.

I need a complete civil foundation drawing for a single-story commercial EV charging shed. The plan must follow all relevant industry-specific standards for this type of installation, accounting for equipment loads, conduit trenches, and vehicle traffic. Please include: • A scaled foundation layout with footing dimensions, column pad details, and slab thickness. • Reinforcement schedules and notes ready for the structural engineer’s review. • Anchor bolt locations coordinated with the charger manufacturer’s templates. • A concise calculation sheet showing bearing capacity checks and load paths. Deliver the final drawing set in both DWG and printable PDF so the team can file it directly with our permit package and hand it to the contractor witho...

I have a complete set of furniture drawings in PDF format and need a detailed quantity take-off. The focus is strictly on two areas: every loose or built-in furniture piece shown, and all finishes specified on those same drawings. You will review the PDFs, extract each item with its corresponding finish, and summarise the counts in an organised Excel (or Google Sheets) schedule. Please include drawing references, item descriptions, units, and totals so that I can trace anything back quickly. Deliverables • One editable spreadsheet with separate tabs for Furniture Pieces and Finishes • A marked-up PDF (or screenshot set) highlighting where each count was taken, for verification Accuracy is the priority; experience with Bluebeam, PlanSwift, or similar take-off tools wi...

We are converting our loft into a habitable room and the new dormer is almost ready now. However we've reconsidered the original place of the new loft staircase and now we need the front chimney breast disconnected at the loft level (to be removed) and the remaining chimney stack above - supported; as well as calculations and drawing of a new loft staircase opening which will be in the place of the removed chimney. Attached, you can find more details - hope these explain things better. Please let me know if you could help. Look forward to hearing back,

I’m working on a new residential project and need an experienced architect to guide the overall design from concept to build-ready documents. At this stage nothing is locked in, so you’ll have room to shape layouts, circulation, façade treatment, and spatial flow while keeping practicality, local code compliance, and budget realities in mind. Here’s what I’m hoping to achieve together: • Preliminary concept studies that test massing, orientation, and general layout • Fully developed floor plans, elevations, and sections in CAD/PDF formats • A few key 3D views or a simple BIM model for visualisation and client approval • A concise specification sheet highlighting materials and structural assumptions Acceptance criteria: • Drawi...

We are converting our loft into a habitable room and the new dormer is almost ready now. However we've reconsidered the original place of the new loft staircase and now we need the front chimney breast disconnected at the loft level (to be removed) and the remaining chimney stack above - supported; as well as calculations and drawing of a new loft staircase opening which will be in the place of the removed chimney. Attached, you can find more details - hope these explain things better. Please let me know if you could help. Look forward to hearing back,

Looking for a interior designer for our factory work… like reception, pantry, cabin, etc… at Ahmedabad, Gujarat, India

My commercial building drawings are already at final‐design stage; I now need an Alabama-licensed architect to perform a focused code-compliance review and add an official seal so the set is ready for permit submission. All disciplines—structural, MEP, life-safety—have been coordinated, and the files are available in both Revit and PDF. I simply require your professional verification that every sheet meets current Alabama building code, followed by your signed and sealed title block. Deliverables: • Annotated review comments (if any) returned in PDF. • One digitally signed, code-compliant plan set (PDF). • Two hard-copy stamped sets mailed to my address. Please confirm your active Alabama license number in your proposal and indicate how quickly you...

I need a complete, code-compliant fire-sprinkler layout for a commercial building that is dedicated to retail stores. The scope covers every sales floor, back-of-house corridor and stockroom so shoppers, staff and inventory are fully protected. Please base the design on current NFPA standards and any local amendments. I will supply floor plans in DWG and PDF the moment we start; you return a coordinated sprinkler drawing (AutoCAD or Revit is fine), hydraulic calculations, a pipe and head schedule, and a concise material take-off ready for the estimator. All mains, branch lines, hangers and valves must be shown clearly, with zones and hazard classifications called out so the authority having jurisdiction can review without delay. I’ll review for clear coverage, correct density, bala...