AutoCAD Jobs

I need structural engineering plans for retaining walls being built on the property. I have multiple retaining walls that are being built on the property and would like them engineered to withstand the hillside so that they do not fail prematurely and so that I can get a permit from the city of Orinda, CA. The height of the retaining wall on the street side with a fence on top is roughly 4.5 -5 feet tall. The height of the retaining wall in the drive way is roughly 5 feet tall. In the back yard, there are two additional retaining walls that are roughly 4.5 and 6 feet tall respectively. The length of all of these walls range from 25 feet in the drive way, to roughly 40 feet on the street side, to roughly 40 feet or so in the back yard. I have included the design drawing I received to assist...

Drafted a solar carport want it built. Need it approved and stamped

Looking for an Architect to assist in designing a 2500-3000 sq. ft office building to constructed on a 5400 sq. ft parcel I am purchasing.

Looking for an Architect to assist in designing a 2500-3000 sq. ft office building to constructed on a 5400 sq. ft parcel I am purchasing.

We own a 1.5 acre lot with a 0.75 acre vineyard. On our other 0.75 acres we would like to expand our 1600 sqft house, build an ADU, add a pool and landscaping. Need Seal from Florida.

I need a freelancer to convert a house plan drawing to AutoCad

We are seeking a freelancer to help us draw portable building projects. Our portables are quiet simple structures some are empty some have kitchens and showers inside etc . We will submit to you hand drawn plans and you will put these together into 4 pages (floor plan, elevations , base plan and electrical plan). I have attached a sample of type of work we do.

I am designing a Commercial Vehicle (Semi Trucks) parking area for long-term parking and storage. I would like to maximize the amount of Semi trucks and commercial vehicles that can park in the designated area but also allow space for the trucks to move safely in and out of the lot. I need a layout that creates as many 75ft (L) x 14ft (W) stalls as possible for semis with trailers to park, and as many 34ft (L) x 14ft (W) stalls for smaller commercial vehicles. There also needs to be enough room for trucks to safely maneuver, park, and exit the facility. There is only one entrance/exit, which should be located on the main road. The gate should be 30ft wide. Please include in the design an 8 ft fence around the entire property, as well as trees on the property for shade, preferably near th...

I want some basic design work done that I can provide the county for adding some changes and extensions to my present garage structure. Doesn't have to be extensive like a full blown arch. would do, but needs to be engineered for snow load in my area and two story design. I will provide pictures of the existing structure with ideas I have to enlarge the structure. There may be extensive changes inside, depending on recommendations by you, or starting all over with a new design

Land development - 30 homes or 60 townhouses

I have a single damaged roof truss that needs drawings to make safe and Florida engineered stamp to pass and submit code requirements

Looking for a supplements dispenser design with a pill release mechanism. Drafted on auto cad

we have a digital survey that we need to update with a few structures that need to be drawn in to scale. the property is 5 acres and there are about 10 small structures.

I want to render apply some recommended colors for the external elevations of the villa. all the files are available.

I am looking to have house remodelled. Ground and 1st floor. Dimensions 13.5m x 4.6m inside wall to wall. Downstairs roof height - 2.1m Upstairs roof height - 2.5m at apex (centre of room). The outer walls are 0.85m in heght and beams slope to apex @ 0.45m centres. There are horizontal ties at 1.93m (beam underside) from floor. I have attached 1. Image of the 1st floor. Note one end is full height (expose brickwork so like to keep a feature. There is also another full height wall towards one end of long side. 2. proposed downstairs floor-plan with stairs in place - option 1 3. proposed downstairs floor-plan with stairs in place - option 2 4. Upstairs potential floor plan to match option 1 & 2 stairs. There are no internal walls so both up and down can be blank canvas. Particularly...

I am looking to have house remodelled. Ground and 1st floor. Dimensions 13.5m x 4.6m inside wall to wall. Downstairs roof height - 2.1m Upstairs roof height - 2.5m at apex (centre of room). The outer walls are 0.85m in heght and beams slope to apex @ 0.45m centres. There are horizontal ties at 1.93m (beam underside) from floor. I have attached 1. Image of the 1st floor. Note one end is full height (expose brickwork so like to keep a feature. There is also another full height wall towards one end of long side. 2. proposed downstairs floor-plan with stairs in place - option 1 3. proposed downstairs floor-plan with stairs in place - option 2 4. Upstairs potential floor plan to match option 1 & 2 stairs. There are no internal walls so both up and down can be blank canvas. Particularly...

I have a modeled 3d lamp, now I need to get technical drawings from it. Technical drawings must be as detailed as possible, from the outside of the lamp and also all of the insides of it. Model is built in fusion, I can send it to you in other formats.

Need exterior and interior architecture for house 5 rooms and 7 bathroom It's will for competative work

Architectural Designs & Master planing for a beach club & Lounge

I am looking for full mechanical plans using the attached architectural plans. Specifically, I'm looking for HVAC, plumbing, and electrical plans for the whole house. The blue circle in the plans is where the plumbing & electrical enters the house, and the red circle is approx where the gas line enters the house. Please reach out with any questions if needed.

Cad work design full floor plan celling plan and sections

interior design for home, shops, and other buildings

Adding some Equipment and making a layout and elevation view for an edible oil mill setup whihc includes material handling and machinery as main equipment

Se trata de obtener un mapa de ruido en el entorno de una planta industrial a partir de las fuentes de ruido situados en un planos. Se pueden pasar las instalaciones en revit

I need BIM model. Will provide you floor plan for now and point cloud file later. 12 sections too

I need a freelancer to redesign my 2D house plan to auto cad format

I have various retail units from our client. They have only sent visuals and I require CAD drawings to share with our manufacturers. These would require dimensions and specs which I can assist with.

I need cad full project design with celling, floor plan, and sections

1800 sq ft 2 floor drawing of house . architect needed. and suggestions required after our requirements send.

Requirements: Experience with 3D modeling. Autodesk Inventor preferred Experience with building scalable models for use in real-time applications. To create modular models of industrial-style equipment from reference images Experience with GoDot engine Preferred experience:* Experience with PDM software for 3D Modeling Mechanical design of sheet metal parts, weldments, pipe fittings Detailed fabrication drawings, assembly drawings, submittal drawings Inventor 3D modeling: Sheet metal Industrial plant layout and equipment drawings in AutoCad 2D/3D

Need an architect to develop a building plan from floor plan to the roofing plan

i want to make a small architect plan and need to be stamped from US certified stamp architect i don't have plan but i have pic what i want !!

I need a quick job to deliver in a short time.

CAD designer required for mechanical and electrical works drawings updates act,

I am looking for modern Façade Design for my new House with selecting material

I want to make realistic 3D model design for a lobby entrance for residential building with modern model

I want 3D model design with 3dmax or sketch up to make an entrance design

Looking for someone to do functional and modern architectural and interior design for a 400 sq ft garage apartment. The space is taken down to the studs. All plumbing and electrical will need to be replaced so suggestions on best functional layout are welcome. Currently, plumbing for kitchen runs along back wall. Bathroom is in back left corner. Windows run are on every wall. Looking for a modular, clean layout. Will send pictures of space and specfic measurements to selected candidate.

Looking for an independent Civil Architect or Architecture firm to collaborate on various Civil structure modeling, drawing and BIM projects. - Should be experienced with Architecture modeling, drawing, visualization, construction documents set creation - Fluent in AutoCAD, Revit and other CAD software - Should be able to communicate well - Should do proper QC of all construction drawings ** MUST BE WINNING TO SIGN NDA

Examples attached of sites we work, retail site freestanding QSR & Fast casual restaurant site plans need drawn to maximize every square foot of very expenses retail sites in the busiest retail corridors (Removed by Freelancer.com)

We are looking to have someone work with us on an ongoing basis to draw 3D models relating to the artificial turf industry

Would like to have done a scale elevation print With front right and left.. based on the information provided all wall are 2x4 widh and roofing rafters are 2x6 wide will need to have cardinal location

Create architectual drawing for #1: an appartment building 150m2 with 5 appartments over 3 levels plus penthouse, roof-terrace and a pool. AND one for #2 an appartment building 210m2 with 6 appartments over 4 levels plus penthouse, roof-terrace and a pool. I will supply you with the floorplan and all needed info. Both buildings have an underground carpark and lift. Attached screenshots are reference for possible design-options. I need the building #1 rendered and placed 6x onto a land parcel. I need the building #2 rendered and placed 3x onto a land parcel. I have the dwg file of the terrain.

give me a house design for 9x8 meters. 1 floor or 2 floor plan

Hi, Matthew. please Bid on this project. then i can help you. The overall building is 5-20' bays with the porch. It will look like the photo I sent. The inside dimensions will be 100'x40'. So the overall dimensions on the outside dimension will be 101'x41'

need panel schedule and one line design for swimming pool equipment

I need to make a plan with CAD to build a new house on my property. I have a SketchUp on paper. I need someone to draw them with CAD and add explanations to them based on Nova Scotia bylaws. Some building architect experience is needed to review the plans

I look forward to hearing from you regarding production of 'existing' plans for a planning application for a property in South West London. Total of c 1000sq ft on 2 floors.

I just purchased a office condominium unit. I want a 2D floor plan drawn. I took the interior measurements. I'm not looking for official blueprints. Just something I can show to potential tenants. 1050 Sq ft. With about 10 rooms and two hallways.

It’s a 3 story new build. 4 flats and 1 shop.