Filtro

Minhas pesquisas recentes
Filtrar por:
Orçamento
para
para
para
Habilidades
Idiomas
    Estado do Trabalho
    1,245 matlab files trabalhos encontrados, preços em EUR

    Hi, ...code in Matlab and I have some variables to be optimized based on the test. So, I have some temperature readings from my experiment and some temp readings that my code calculates. What I want is to find optimized values so that RMSE of the temp reading of experiment and the calculated readings is minimum. I will provide my code and the files.

    €97 (Avg Bid)
    €97 M\u00e9dia
    14 ofertas

    ...numbers but as a triplet of normal numbers. I would like to have the work done until 5 August and for aprox $20-30USD. I attach here the matlab files (daf_read data and defuzzification_R are complete) and the 2 excel files with the data although they are read and stored in corresponding tables in the read_data. The par_utilities file is the one which is

    €34 (Avg Bid)
    €34 M\u00e9dia
    2 ofertas

    Hello. I need to create a project through the Matlab where the photovoltaic parameters such as the irradiance, temperature, current, voltage, and power can be read and detected on a display through the use of Raspberry PI .Example is to monitor the change of temperature over a 24 hours and how this affect the other photovoltaic parameters values such

    €113 (Avg Bid)
    €113 M\u00e9dia
    5 ofertas

    Recoding the files in Matlab. I will provide the files

    €335 (Avg Bid)
    €335 M\u00e9dia
    47 ofertas

    I need Matlab 2018version install files including cracks.

    €51 (Avg Bid)
    €51 M\u00e9dia
    11 ofertas

    This figure (a) has white color background. But, When I copy figure from the MATLAB, I’d like to get transparent background same as figure (b). I attached the files.

    €21 (Avg Bid)
    €21 M\u00e9dia
    3 ofertas

    I need you to develop some software for me. I would like this software to be developed for Windows . I need matlab or R studio code which can merge time data from to files into one. Time need to be merge as nearest from one file with nearest to onother one

    €25 (Avg Bid)
    Destacado
    €25 M\u00e9dia
    3 ofertas

    I want a freelancer to do Matlab coding for OFDM System. These codes are also available online so freelancer can use the existing codes. I just want the below two simulations to work and get the output in Matlab. Simulation 1: Write matlab code to Simulate OFDM system with different modulation scheme like (BPSK , QPSK and (16 , 64) QAM) and the

    €32 / hr (Avg Bid)
    €32 / hr M\u00e9dia
    21 ofertas
    Matlab and Gap code Encerrado left

    Need a freelancer who can code and have knowledge in Matlab and Gap files and can also convert Gap files to matlab should only bid on this [login to view URL] details will be given

    €21 (Avg Bid)
    €21 M\u00e9dia
    7 ofertas

    Help to to convert source code from GAP to MATLAB. There are six files. It should be converted into matlab (m-file)

    €18 (Avg Bid)
    €18 M\u00e9dia
    3 ofertas

    I'm having a lot of trouble installing Caffe for windows and other dependencies too. I just need so...having a lot of trouble installing Caffe for windows and other dependencies too. I just need someone to help run the files in the following github repo: [login to view URL] (I have matlab installed already)

    €19 (Avg Bid)
    €19 M\u00e9dia
    4 ofertas

    ...which is mainly written in Python, however, some of the code is in Matlab. [login to view URL] The files to be converted to Python are the following. 1) shape_context_warp.m (Auxiliary files in shape_context folder) 2) prepare_data/extract_tps.m This will require the Matlab Image module. Code can be run with Octave which also has an image

    €356 (Avg Bid)
    €356 M\u00e9dia
    40 ofertas

    this is a simple work ,just require the communcation matlab skills ,you have to done all of it ,here i post two m files to help you

    €537 (Avg Bid)
    €537 M\u00e9dia
    5 ofertas

    Text files were made in two types; one ends with “_P” for position and the other ends with “_L” for Load. Each test produces two text files. One is ending with “_P” has 6 translations (mm) or rotations (degree) : Tx, Ty, Tz, Rx, Ry, Rz The second ends with “_L” has 6 forces (N) or moments (Nm): Fx, Fy, Fz, Mx, My, Mz The current cod...

    €31 (Avg Bid)
    €31 M\u00e9dia
    1 ofertas

    ...to use Inventor) but if it is not software specific then it's better. >> For computer aided engineering (CAE), we can use Autodesk Inventor and fusion 360, Autodesk CFD, MATLAB, software developed in-house for each project, COMSOL multiphysics and ANSYS multiphysics/workbench (but if we can avoid mentioning specific software too much is better).

    €420 (Avg Bid)
    €420 M\u00e9dia
    6 ofertas

    requirement: application tool: C++ / Java/MATLAB or any other programming language About the project: To show the position of the PIG robot (pipeline inspection robot) in a 2D plot. The position can be calculated by 2 methods: ELF(electromagnetic low frequency transmission) and acoustic signals(input files contain these data). The graph has to be plotted

    €70 (Avg Bid)
    €70 M\u00e9dia
    7 ofertas

    ...to run it as I haven't used MATLAB before. I have some stress data that I need to do 'rainflow counting' on. The algorithm supposedly does this, but I can't work out how to feed my data into it. This is a very small project and would take about 5 minutes for anyone experienced in MATLAB. I have attached the MATLAB files from the website along with...

    €16 (Avg Bid)
    €16 M\u00e9dia
    3 ofertas
    R or Matlab Task Encerrado left

    I have some trend...in our case. Before applying any algorithm, he/she must inform me regarding the algorithm he/she intends to apply The expert may use R or Matlab as the programming language. Due to large size, I've uploaded Files (M-File and a Data-File) with link ([login to view URL] )

    €16 (Avg Bid)
    €16 M\u00e9dia
    5 ofertas

    I working on t...someone, it will be an easy task and fast way to earn some money. I'll send to You all required files. You only need to optimize ( obj. function as maximum electrostatic force / obj. function as minimization of the mass ) the shape via matlab software or matlab. There are some screenshots of 2D/3D models: [login to view URL]

    €26 / hr (Avg Bid)
    €26 / hr M\u00e9dia
    4 ofertas

    I working on the optimiziation of the MEMS Actuator - Comb Drive. Purpose of my project is to...someone, it will be an easy task and fast way to earn some money. Im sending to You all required files. You only need to optimize ( obj. function as maximum electrostatic force / obj. function as minimization of the mass ) the shape via software or matlab.

    €50 (Avg Bid)
    €50 M\u00e9dia
    2 ofertas

    ...to use Inventor) but if it is not software specific then it's better. >> For computer aided engineering (CAE), we can use Autodesk Inventor and fusion 360, Autodesk CFD, MATLAB, software developed in-house for each project, COMSOL multiphysics and ANSYS multiphysics/workbench (but if we can avoid mentioning specific software too much is better).

    €450 (Avg Bid)
    Destacado Urgente
    €450 M\u00e9dia
    17 ofertas

    I want a freelancer to do Matlab coding for OFDM System. These codes are also available online so freelancer can use the existing codes. I just want the below two simulations to work and get the output in Matlab. Simulation 1: Write matlab code to Simulate OFDM system with different modulation scheme like (BPSK , QPSK and (16 , 64) QAM) and the

    €83 (Avg Bid)
    €83 M\u00e9dia
    24 ofertas

    1. The project is asked to solve four ordinary differential...four ordinary differential equation showing the steps 2. find the transfer functions to be able to do the simulink and Matlab 3. apply the simulink and Matlab 4. JUST SHOW THE STEPS OF SOLVING THE ODEs + INSERT SIMULINK & MATLAB FILES (Chemical Engineering - Process Dynamics and Control)

    €39 (Avg Bid)
    €39 M\u00e9dia
    27 ofertas

    ...following services: - Modeling and Simulation in engineering and applied physics - Optimization - Multiphysics Analysis We prefer to use the Autodesk family of products, MATLAB and Simulink, COMSOL Multiphysics, ANSYS Multiphysics, discipline specific software and software developed in-house. But the content, if possible, should be software independent

    €80 (Avg Bid)
    €80 M\u00e9dia
    4 ofertas

    ...theoretical dynamic sitting experiment mimicking the motion of a seated occupant on a planing hull via Matlab, i.e (in the x,y,z axis, Force vs time graphs, Moment vs time graphs and centre of pressure vs time graph). - I need one who can calculate from Matlab files, the angular motion components and relevant joint and body segment angles and use these to conduct

    €71 (Avg Bid)
    €71 M\u00e9dia
    11 ofertas

    ...following services: - Modeling and Simulation in engineering and applied physics - Optimization - Multiphysics Analysis We prefer to use the Autodesk family of products, MATLAB and Simulink, COMSOL Multiphysics, ANSYS Multiphysics, discipline specific software and software developed in-house. But the content, if possible, should be software independent

    €122 (Avg Bid)
    €122 M\u00e9dia
    30 ofertas

    ...following services: - Modeling and Simulation in engineering and applied physics - Optimization - Multiphysics Analysis We prefer to use the Autodesk family of products, MATLAB and Simulink, COMSOL Multiphysics, ANSYS Multiphysics, discipline specific software and software developed in-house. But the content, if possible, should be software independent

    €329 (Avg Bid)
    €329 M\u00e9dia
    8 ofertas
    matlab GUI Encerrado left

    I have some matlab files. i need someone to recreate the codes and the GUI with it in a different way so that there is no plagiarism

    €262 (Avg Bid)
    €262 M\u00e9dia
    16 ofertas

    ...following services: - Modeling and Simulation in engineering and applied physics - Optimization - Multiphysics Analysis We prefer to use the Autodesk family of products, MATLAB and Simulink, COMSOL Multiphysics, ANSYS Multiphysics, discipline specific software and software developed in-house. But the content, if possible, should be software independent

    €340 (Avg Bid)
    €340 M\u00e9dia
    16 ofertas

    1. resolve bugs in the files attached. 2. After resolving bugs, create a login page to access this GUI.

    €5 / hr (Avg Bid)
    €5 / hr M\u00e9dia
    8 ofertas
    Run matlap code Encerrado left

    I have set of text files run through Matlab code to print a result in a text files... just i replace one file with my new results text file to get the final result but there is error I can't fix it .. so any one have experience in Matlap could help me to fix that error on my desktop by 3$ .. All regards.

    €3 / hr (Avg Bid)
    €3 / hr M\u00e9dia
    18 ofertas

    ...plotter HP T730 as well (to include a picture of a plotter would be nice) >> For computer aided engineering (CAE), we can use Autodesk Inventor and fusion 360, Autodesk CFD, MATLAB, software developed in-house for each project, COMSOL multiphysics and ANSYS multiphysics/workbench but if we can avoid mentioning specific software the better. >> For computer

    €507 (Avg Bid)
    Urgente
    €507 M\u00e9dia
    15 ofertas
    CMA-ES optimization Encerrado left

    I was assigned a project on evolutionary strategies (CMA-ES). Your code will be based on the files I have attached and you will have to choose the best way of handling the functions [login to view URL] code will be in matlab.

    €125 (Avg Bid)
    €125 M\u00e9dia
    7 ofertas

    Hi srikumar88, I am currently working on a project and it is about processing data. My pro...srikumar88, I am currently working on a project and it is about processing data. My project supervisor has given me a code and wants me to execute it for various files using MATLAB. I have never used MATLAB, I was wondering if you would be happy to discuss it.

    €214 (Avg Bid)
    €214 M\u00e9dia
    2 ofertas

    A steganalysis tool needs to be developed using Matlab..matlab files are already present... integration of Matlab files using c++

    €8 (Avg Bid)
    €8 M\u00e9dia
    1 ofertas
    Steganalysis tool Encerrado left

    ...develop some software for me. I would like this software to be developed for Windows . Development of steganalysis tool using Matlab and c++. Matlab files already present with me. Integration reqd using c++. Few more Matlab codes need to be deveoped according to a algorithm already present. Previous project report on this topic already there. It will

    €32 (Avg Bid)
    €32 M\u00e9dia
    1 ofertas

    For my PhD work, I”m searching for someone who can support me in the analysis done in Matlab. The data collection is done in qtm (qualisys track manager): 3D coordinates at 200 Hz. These coordinates are send to a Matlab based software program (qHorse). This program does an automatic analysis of the basic parameters, which calculate asymmetry, range

    €1058 (Avg Bid)
    €1058 M\u00e9dia
    21 ofertas

    You will have to c...variation within the classes. Thus, we have a classical nonseparable problem. The waveform files has five letter names with extension wav. The first letter indicates man/female/boy/girl, the next two person number and the two last the vowel name. You will have to use Matlab for this but you can't use any in-built tools for this.

    €40 (Avg Bid)
    €40 M\u00e9dia
    8 ofertas

    I have to develop a steganalysis tool . I have done most of the work. Final integrating is left . I am having MATLAB files to do it but have to integrate them to create a final fyi based software.

    €64 (Avg Bid)
    €64 M\u00e9dia
    1 ofertas

    I have a huge matlab program. This program has a bunch of functions. Those functions are stored in different/separate matlab files i want to make a gui and a standalone app for this program.

    €435 (Avg Bid)
    €435 M\u00e9dia
    29 ofertas

    ...have 2 small projects must be done in these two days , you will find 2 attached files from my college materials , if you want more info you can message me anytime or we can contact by phone . 1st project : 9*9 sudoku solver by matlab 2nd project : xor gate by matlab you will find "and,or gate " on the attached slides , may it help you please

    €9 (Avg Bid)
    €9 M\u00e9dia
    1 ofertas

    I would like for someone who is proficient in MATLAB codings to help me modify my coding by improving the response of the MATLAB simulation which replicates a steel rolling rig. Control engineering and MATLAB skills required for this task. Files will be given as reference. Message for further details.

    €27 (Avg Bid)
    €27 M\u00e9dia
    11 ofertas

    ...assessment based on the fishing ground and the lateral distances from the centerline? Key word : Risk assessment, Risk analysis I attached the whole data (Matlab files). please download the files....

    €47 (Avg Bid)
    €47 M\u00e9dia
    1 ofertas

    ...assessment based on the fishing ground and the lateral distances from the centerline? Key word : Risk assessment, Risk analysis I attached the whole data (Matlab files). please download the files....

    €165 (Avg Bid)
    €165 M\u00e9dia
    10 ofertas

    if i have some videos which are atmospheric turbulence effected. so i need matlab code to remove this turbulence effect form this video and get good quality of video at end of this code. and also quality measures in terms of psnr, msr. i also provided some documents files which help you to got batter idea.

    €41 (Avg Bid)
    €41 M\u00e9dia
    2 ofertas

    if i have some videos which are atmospheric turbulence effected. so i need matlab code to remove this turbulence effect form this video and get good quality of video at end of this code. and also quality measures in terms of psnr, msr. i also provided some documents files which help you to got batter idea.

    €55 (Avg Bid)
    €55 M\u00e9dia
    3 ofertas

    I would like for someone who is proficient in MATLAB codings to help me modify my coding by introducing disturbance and a coding to compensate that disturbance in a damper system which replicates a steel rolling rig. Files will be given as reference.

    €44 (Avg Bid)
    €44 M\u00e9dia
    14 ofertas
    DSP Project Encerrado left

    Design Requirement Design a MATLAB based GUI system in one of the following domains: 1. Digital audio compression to reduce the transmission bandwidth requirement of digital audio streams and the storage size of audio files. 2. Voice recognition and execution of speech commands. No more than five commands is enough. Example: move an object on the

    €94 (Avg Bid)
    €94 M\u00e9dia
    6 ofertas

    Fluid Machinery Project report and Presentation with all required calculations and Matlab and Simulink files and Simscape files. I will provide more information and explain it properly personally.

    €111 (Avg Bid)
    €111 M\u00e9dia
    24 ofertas

    i want a function to compare two audio files by java integrated with matlab

    €23 (Avg Bid)
    €23 M\u00e9dia
    6 ofertas